APO Research, Inc.
Talk to an analyst

APO RESEARCH · REPORT

Aluminum Die Casting Alloys

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Explore the product
View pricing & licenses

Product & engineering

Understand the product.

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Silicon lowers liquidus temperature and increases fluidity while reducing hot-tearing susceptibility; typical contents range from approximately 7–12% for general-purpose castings to ~17–19% for abrasion-resistant applications. Copper additions raise strength and hardness via Al–Cu intermetallics with a corresponding reduction in ductility and corrosion tolerance. Magnesium supports age-hardening responses and, in vacuum-assisted or squeeze-cast conditions, enables heat-treatable structural performance. Iron, prevalent in recycled streams, is held within narrow limits to manage die soldering; manganese modifies Fe-bearing phases from plate-like β-Fe to less deleterious α-Fe morphologies. Nickel appears in elevated-temperature grades for strength retention and creep resistance. Grain refiners (Ti–B) and eutectic modifiers (Sr) adjust nucleation density and silicon morphology under the high cooling rates typical of die casting.

Process conditions influence alloy identity as directly as nominal composition. High-pressure die casting employs high gate velocities and intensification pressures that can entrain oxide films and gas; alloy windows and melt practice therefore converge on oxide-film toughness, wetting behavior, and freezing ranges compatible with thin-wall solidification. Low-pressure and squeeze casting operate at lower turbulence and accommodate thicker sections with reduced porosity. Vacuum-assisted HPDC and semi-solid routes reduce entrainment levels to thresholds that permit T5/T6 heat treatments, extending aluminum die casting alloys into large body-structure and e-powertrain domains.

Mechanical and physical properties arise from composition, section thickness, porosity, and cooling rate. As-cast Al–Si–Cu grades commonly exhibit ultimate tensile strength on the order of 250–330 MPa, yield strength around 120–180 MPa, and elongation approximately 1–5% in thin sections. Al–Si–Mg grades emphasize ductility and corrosion performance with lower copper contents. Very high-silicon alloys provide elevated hardness and wear resistance with limited elongation. Thermal conductivity typically lies near 80–130 W·m⁻¹·K⁻¹, the coefficient of thermal expansion near 21–24 μm·m⁻¹·K⁻¹, and density near 2.70–2.75 g·cm⁻³. At elevated temperatures, strength retention correlates with the stability of Cu-, Mg-, and Ni-bearing intermetallics and the porosity state established during casting.

Higher copper contents correlate with reduced chloride-environment tolerance relative to low-Cu Al–Si–Mg systems. The high silicon fraction and as-cast skin porosity of HPDC tend to produce gray, matte anodic finishes; impregnation, conversion coatings, e-coat, and powder coatings are widely used to stabilize appearance and seal leak paths. Weldability varies with gas content and oxide integrity in the casting skin and improves under vacuum-assisted practices.

Quality assurance in production employs compositional control (Fe/Mn balance, Zn, alkalis, Pb/Sn), melt cleanliness (degassing and fluxing to limit hydrogen and inclusions), and die thermal management to regulate fill and solidification gradients. Runner and overflow design, lubricant control, and vacuum systems govern porosity and soldering tendencies. Verification commonly uses tensile specimens from coupons or in-situ cast features, pressure-tightness tests for fluid-handling components, radiography or CT for internal integrity, and dimensional metrology to monitor die wear and thermal distortion.

In use, balanced Al–Si–Cu compositions are prevalent in housings, brackets, and appliance components; higher-silicon alloys appear frequently in thin-wall electronics enclosures and heat-dissipation parts; low-Cu Al–Si–Mg systems populate fluid manifolds and corrosion-sensitive environments; Ni-containing Al–Si–Cu–Ni grades occupy elevated-temperature zones in driveline and engine-adjacent service; vacuum-cast, heat-treatable Al–Si–Mg–Mn variants are established in structural body nodes and large e-powertrain enclosures.

Material sourcing in this sector relies heavily on secondary aluminum. Recycling loops introduce variability in Fe and minor elements, and industrial practice stabilizes these through dilution and targeted additions to maintain die life, surface quality, and mechanical consistency. In industrial terms, the “alloy” is defined jointly by nominal composition and the process-dependent microstructure and defect population produced under die-casting conditions.

Selected research

Industry Research

Aluminum Die Casting Alloys Industry Research Report 2026

Report ID 173221500528 December 2025142 pages

Choose your research edition.

Industry ResearchAluminum Die Casting Alloys Industry Research Report 2026142 pages · $2,950 USDIndustry Growth & TrendsGlobal Aluminum Die Casting Alloys Industry Growth and Trends Forecast to 2032127 pages · $3,450 USDMarket StructureGlobal Aluminum Die Casting Alloys Market by Size, by Type, by Application, by Region, History and Forecast 2021-2032193 pages · $3,950 USDMarket Outlook & Growth OpportunitiesGlobal Aluminum Die Casting Alloys Market Outlook and Growth Opportunities 2026211 pages · $4,250 USDMarket Analysis & ForecastGlobal Aluminum Die Casting Alloys Market Analysis and Forecast 2026-2032214 pages · $4,950 USD

Market perspective

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Silicon lowers liquidus temperature and increases fluidity while reducing hot-tearing susceptibility; typical contents range from approximately 7–12% for general-purpose castings to ~17–19% for abrasion-resistant applications. Copper additions raise strength and hardness via Al–Cu intermetallics with a corresponding reduction in ductility and corrosion tolerance. Magnesium supports age-hardening responses and, in vacuum-assisted or squeeze-cast conditions, enables heat-treatable structural performance. Iron, prevalent in recycled streams, is held within narrow limits to manage die soldering; manganese modifies Fe-bearing phases from plate-like β-Fe to less deleterious α-Fe morphologies. Nickel appears in elevated-temperature grades for strength retention and creep resistance. Grain refiners (Ti–B) and eutectic modifiers (Sr) adjust nucleation density and silicon morphology under the high cooling rates typical of die casting.

Process conditions influence alloy identity as directly as nominal composition. High-pressure die casting employs high gate velocities and intensification pressures that can entrain oxide films and gas; alloy windows and melt practice therefore converge on oxide-film toughness, wetting behavior, and freezing ranges compatible with thin-wall solidification. Low-pressure and squeeze casting operate at lower turbulence and accommodate thicker sections with reduced porosity. Vacuum-assisted HPDC and semi-solid routes reduce entrainment levels to thresholds that permit T5/T6 heat treatments, extending aluminum die casting alloys into large body-structure and e-powertrain domains.

Read the full market overview

Mechanical and physical properties arise from composition, section thickness, porosity, and cooling rate. As-cast Al–Si–Cu grades commonly exhibit ultimate tensile strength on the order of 250–330 MPa, yield strength around 120–180 MPa, and elongation approximately 1–5% in thin sections. Al–Si–Mg grades emphasize ductility and corrosion performance with lower copper contents. Very high-silicon alloys provide elevated hardness and wear resistance with limited elongation. Thermal conductivity typically lies near 80–130 W·m⁻¹·K⁻¹, the coefficient of thermal expansion near 21–24 μm·m⁻¹·K⁻¹, and density near 2.70–2.75 g·cm⁻³. At elevated temperatures, strength retention correlates with the stability of Cu-, Mg-, and Ni-bearing intermetallics and the porosity state established during casting.

Higher copper contents correlate with reduced chloride-environment tolerance relative to low-Cu Al–Si–Mg systems. The high silicon fraction and as-cast skin porosity of HPDC tend to produce gray, matte anodic finishes; impregnation, conversion coatings, e-coat, and powder coatings are widely used to stabilize appearance and seal leak paths. Weldability varies with gas content and oxide integrity in the casting skin and improves under vacuum-assisted practices.

Quality assurance in production employs compositional control (Fe/Mn balance, Zn, alkalis, Pb/Sn), melt cleanliness (degassing and fluxing to limit hydrogen and inclusions), and die thermal management to regulate fill and solidification gradients. Runner and overflow design, lubricant control, and vacuum systems govern porosity and soldering tendencies. Verification commonly uses tensile specimens from coupons or in-situ cast features, pressure-tightness tests for fluid-handling components, radiography or CT for internal integrity, and dimensional metrology to monitor die wear and thermal distortion.

In use, balanced Al–Si–Cu compositions are prevalent in housings, brackets, and appliance components; higher-silicon alloys appear frequently in thin-wall electronics enclosures and heat-dissipation parts; low-Cu Al–Si–Mg systems populate fluid manifolds and corrosion-sensitive environments; Ni-containing Al–Si–Cu–Ni grades occupy elevated-temperature zones in driveline and engine-adjacent service; vacuum-cast, heat-treatable Al–Si–Mg–Mn variants are established in structural body nodes and large e-powertrain enclosures.

Material sourcing in this sector relies heavily on secondary aluminum. Recycling loops introduce variability in Fe and minor elements, and industrial practice stabilizes these through dilution and targeted additions to maintain die life, surface quality, and mechanical consistency. In industrial terms, the “alloy” is defined jointly by nominal composition and the process-dependent microstructure and defect population produced under die-casting conditions.

The global Aluminum Die Casting Alloys market was valued at US$ million in 2025 and is projected to reach US$ million by 2032, implying a CAGR of % over 2026–2032.

The North America market for Aluminum Die Casting Alloys is forecast to increase from US$ million in 2026 to US$ million by 2032, corresponding to a CAGR of % over 2026–2032.

The Europe market for Aluminum Die Casting Alloys is projected to rise from US$ million in 2026 to US$ million by 2032, registering a CAGR of % over 2026–2032.

The Asia Pacific market for Aluminum Die Casting Alloys is expected to grow from US$ million in 2026 to US$ million by 2032, at a CAGR of % over 2026–2032.

Leading global manufacturers of Aluminum Die Casting Alloys include , among others. In 2025, the top three vendors together accounted for approximately % of global revenue.

Report Scope

This report quantifies the global Aluminum Die Casting Alloys market in revenue (US$ million) and, where applicable, sales volume (t), using 2025 as the base year and providing annual historical and forecast data for 2021–2032.

It standardizes definitions of types and applications, harmonizes vendor attribution, and presents comparable time series by company, type, application, and region/country, including indicative price bands (US$/t) and concentration ratios (CR5/CR10).

The outputs are intended to support strategy development, budgeting, and performance benchmarking for manufacturers, new entrants, channel partners, and investors; the report also reviews technology shifts and notable product introductions relevant to Aluminum Die Casting Alloys.

Key Companies & Market Share Insights

This section profiles leading manufacturers, combining 2021–2025 results with a 2026–2032 outlook. It reports revenue, market share, price bands, product and application mix, regional and channel mix, and key developments (M&A, capacity additions, certifications). It also provides global revenue, average price, and—where applicable—sales volume by manufacturer, and calculates CR5/CR10 and rank changes to support comparative benchmarking.

Aluminum Die Casting Alloys Market by Company

Nemak

Xusheng

Ryobi

Ahresty

DGS

IKD

Guangdong Wencan

Georg Fischer

Jiangsu Rongtai

Martinrea

Teksid

Guangdong Hongtu

Millison Technologies

Handtmann

Yadelin

Aludyne

Rockman

MK Tron

Form Technologies

Sandhar

LTH Castings

Endurance

Eontec

Tatfook Technology

Foryou Corporation

Gibbs

Nanjing Chervon

Aluminum Die Casting Alloys Segment by Type

A356

A360

A380

A383

B390

A413

Other

Aluminum Die Casting Alloys Segment by Application

Automotive

Telecommunications

Home Appliances

Medical Equipment

Power Tools

Others

Aluminum Die Casting Alloys Segment by Region

North America

United States

Canada

Mexico

Europe

Germany

France

U.K.

Italy

Russia

Spain

Netherlands

Switzerland

Sweden

Poland

Asia-Pacific

China

Japan

South Korea

India

Australia

Taiwan

Southeast Asia

South America

Brazil

Argentina

Chile

Colombia

Middle East & Africa

Egypt

South Africa

Israel

Türkiye

GCC Countries

Key Drivers & Barriers

High-impact rendering factors and drivers have been studied in this report to aid the readers to understand the general development. Moreover, the report includes restraints and challenges that may act as stumbling blocks on the way of the players. This will assist the users to be attentive and make informed decisions related to business. Specialists have also laid their focus on the upcoming business prospects.

Reasons to Buy This Report

1. This report will help the readers to understand the competition within the industries and strategies for the competitive environment to enhance the potential profit. The report also focuses on the competitive landscape of the global Aluminum Die Casting Alloys market, and introduces in detail the market share, industry ranking, competitor ecosystem, market performance, new product development, operation situation, expansion, and acquisition. etc. of the main players, which helps the readers to identify the main competitors and deeply understand the competition pattern of the market.

2. This report will help stakeholders to understand the global industry status and trends of Aluminum Die Casting Alloys and provides them with information on key market drivers, restraints, challenges, and opportunities.

3. This report will help stakeholders to understand competitors better and gain more insights to strengthen their position in their businesses. The competitive landscape section includes the market share and rank (in volume and value), competitor ecosystem, new product development, expansion, and acquisition.

4. This report stays updated with novel technology integration, features, and the latest developments in the market

5. This report helps stakeholders to gain insights into which regions to target globally

6. This report helps stakeholders to gain insights into the end-user perception concerning the adoption of Aluminum Die Casting Alloys.

7. This report helps stakeholders to identify some of the key players in the market and understand their valuable contribution.

Chapter Outline

Chapter 1: Research objectives, research methods, data sources, data cross-validation;

Chapter 2: Introduces the report scope of the report, executive summary of different market segments (by region, product type, application, etc), including the market size of each market segment, future development potential, and so on. It offers a high-level view of the current state of the market and its likely evolution in the short to mid-term, and long term.

Chapter 3: Detailed analysis of Aluminum Die Casting Alloys manufacturers competitive landscape, price, production and value market share, latest development plan, merger, and acquisition information, etc.

Chapter 4: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product production/output, value, price, gross margin, product introduction, recent development, etc.

Chapter 5: Production/output, value of Aluminum Die Casting Alloys by region/country. It provides a quantitative analysis of the market size and development potential of each region in the next six years.

Chapter 6: Consumption of Aluminum Die Casting Alloys in regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space, and production of each country in the world.

Chapter 7: Provides the analysis of various market segments by type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments.

Chapter 8: Provides the analysis of various market segments by application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.

Chapter 9: Analysis of industrial chain, including the upstream and downstream of the industry.

Chapter 10: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.

Chapter 11: The main points and conclusions of the report.

More report detail

Tables and figures
List of Tables Table 1. Secondary Sources Table 2. Primary Sources Table 3. Market Value Comparison by Type (2021 VS 2025 VS 2032) & (US$ Million) Table 4. Market Value Comparison by Application (2021 VS 2025 VS 2032) & (US$ Million) Table 5. Global Aluminum Die Casting Alloys Production by Manufacturers (t) & (2021-2026) Table 6. Global Aluminum Die Casting Alloys Production Market Share by Manufacturers Table 7. Global Aluminum Die Casting Alloys Production Value by Manufacturers (US$ Million) & (2021-2026) Table 8. Global Aluminum Die Casting Alloys Production Value Market Share by Manufacturers (2021-2026) Table 9. Global Aluminum Die Casting Alloys Average Price (USD/t) of Manufacturers (2021-2026) Table 10. Global Aluminum Die Casting Alloys Industry Manufacturers Ranking, 2024 VS 2025 VS 2026 Table 11. Global Aluminum Die Casting Alloys Key Manufacturers, Manufacturing Sites & Headquarters Table 12. Global Aluminum Die Casting Alloys Manufacturers, Product Type & Application Table 13. Global Aluminum Die Casting Alloys Manufacturers Established Date Table 14. Global Manufacturers Market Concentration Ratio (CR5 and HHI) Table 15. Global Aluminum Die Casting Alloys by Manufacturers Type (Tier 1, Tier 2, and Tier 3) & (based on the Production Value of 2025) Table 16. Manufacturers Mergers & Acquisitions, Expansion Plans Table 17. Nemak Company Information Table 18. Nemak Business Overview Table 19. Nemak Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 20. Nemak Aluminum Die Casting Alloys Product Portfolio Table 21. Nemak Recent Development Table 22. Xusheng Company Information Table 23. Xusheng Business Overview Table 24. Xusheng Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 25. Xusheng Aluminum Die Casting Alloys Product Portfolio Table 26. Xusheng Recent Development Table 27. Ryobi Company Information Table 28. Ryobi Business Overview Table 29. Ryobi Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 30. Ryobi Aluminum Die Casting Alloys Product Portfolio Table 31. Ryobi Recent Development Table 32. Ahresty Company Information Table 33. Ahresty Business Overview Table 34. Ahresty Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 35. Ahresty Aluminum Die Casting Alloys Product Portfolio Table 36. Ahresty Recent Development Table 37. DGS Company Information Table 38. DGS Business Overview Table 39. DGS Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 40. DGS Aluminum Die Casting Alloys Product Portfolio Table 41. DGS Recent Development Table 42. IKD Company Information Table 43. IKD Business Overview Table 44. IKD Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 45. IKD Aluminum Die Casting Alloys Product Portfolio Table 46. IKD Recent Development Table 47. Guangdong Wencan Company Information Table 48. Guangdong Wencan Business Overview Table 49. Guangdong Wencan Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 50. Guangdong Wencan Aluminum Die Casting Alloys Product Portfolio Table 51. Guangdong Wencan Recent Development Table 52. Georg Fischer Company Information Table 53. Georg Fischer Business Overview Table 54. Georg Fischer Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 55. Georg Fischer Aluminum Die Casting Alloys Product Portfolio Table 56. Georg Fischer Recent Development Table 57. Jiangsu Rongtai Company Information Table 58. Jiangsu Rongtai Business Overview Table 59. Jiangsu Rongtai Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 60. Jiangsu Rongtai Aluminum Die Casting Alloys Product Portfolio Table 61. Jiangsu Rongtai Recent Development Table 62. Martinrea Company Information Table 63. Martinrea Business Overview Table 64. Martinrea Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 65. Martinrea Aluminum Die Casting Alloys Product Portfolio Table 66. Martinrea Recent Development Table 67. Teksid Company Information Table 68. Teksid Business Overview Table 69. Teksid Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 70. Teksid Aluminum Die Casting Alloys Product Portfolio Table 71. Teksid Recent Development Table 72. Guangdong Hongtu Company Information Table 73. Guangdong Hongtu Business Overview Table 74. Guangdong Hongtu Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 75. Guangdong Hongtu Aluminum Die Casting Alloys Product Portfolio Table 76. Guangdong Hongtu Recent Development Table 77. Millison Technologies Company Information Table 78. Millison Technologies Business Overview Table 79. Millison Technologies Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 80. Millison Technologies Aluminum Die Casting Alloys Product Portfolio Table 81. Millison Technologies Recent Development Table 82. Handtmann Company Information Table 83. Handtmann Business Overview Table 84. Handtmann Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 85. Handtmann Aluminum Die Casting Alloys Product Portfolio Table 86. Handtmann Recent Development Table 87. Yadelin Company Information Table 88. Yadelin Business Overview Table 89. Yadelin Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 90. Yadelin Aluminum Die Casting Alloys Product Portfolio Table 91. Yadelin Recent Development Table 92. Aludyne Company Information Table 93. Aludyne Business Overview Table 94. Aludyne Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 95. Aludyne Aluminum Die Casting Alloys Product Portfolio Table 96. Aludyne Recent Development Table 97. Rockman Company Information Table 98. Rockman Business Overview Table 99. Rockman Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 100. Rockman Aluminum Die Casting Alloys Product Portfolio Table 101. Rockman Recent Development Table 102. MK Tron Company Information Table 103. MK Tron Business Overview Table 104. MK Tron Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 105. MK Tron Aluminum Die Casting Alloys Product Portfolio Table 106. MK Tron Recent Development Table 107. Form Technologies Company Information Table 108. Form Technologies Business Overview Table 109. Form Technologies Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 110. Form Technologies Aluminum Die Casting Alloys Product Portfolio Table 111. Form Technologies Recent Development Table 112. Sandhar Company Information Table 113. Sandhar Business Overview Table 114. Sandhar Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 115. Sandhar Aluminum Die Casting Alloys Product Portfolio Table 116. Sandhar Recent Development Table 117. LTH Castings Company Information Table 118. LTH Castings Business Overview Table 119. LTH Castings Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 120. LTH Castings Aluminum Die Casting Alloys Product Portfolio Table 121. LTH Castings Recent Development Table 122. Endurance Company Information Table 123. Endurance Business Overview Table 124. Endurance Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 125. Endurance Aluminum Die Casting Alloys Product Portfolio Table 126. Endurance Recent Development Table 127. Eontec Company Information Table 128. Eontec Business Overview Table 129. Eontec Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 130. Eontec Aluminum Die Casting Alloys Product Portfolio Table 131. Eontec Recent Development Table 132. Tatfook Technology Company Information Table 133. Tatfook Technology Business Overview Table 134. Tatfook Technology Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 135. Tatfook Technology Aluminum Die Casting Alloys Product Portfolio Table 136. Tatfook Technology Recent Development Table 137. Foryou Corporation Company Information Table 138. Foryou Corporation Business Overview Table 139. Foryou Corporation Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 140. Foryou Corporation Aluminum Die Casting Alloys Product Portfolio Table 141. Foryou Corporation Recent Development Table 142. Gibbs Company Information Table 143. Gibbs Business Overview Table 144. Gibbs Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 145. Gibbs Aluminum Die Casting Alloys Product Portfolio Table 146. Gibbs Recent Development Table 147. Nanjing Chervon Company Information Table 148. Nanjing Chervon Business Overview Table 149. Nanjing Chervon Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 150. Nanjing Chervon Aluminum Die Casting Alloys Product Portfolio Table 151. Nanjing Chervon Recent Development Table 152. Global Aluminum Die Casting Alloys Production Comparison by Region: 2021 VS 2025 VS 2032 (t) Table 153. Global Aluminum Die Casting Alloys Production by Region (2021-2026) & (t) Table 154. Global Aluminum Die Casting Alloys Production Market Share by Region (2021-2026) Table 155. Global Aluminum Die Casting Alloys Production Forecast by Region (2027-2032) & (t) Table 156. Global Aluminum Die Casting Alloys Production Market Share Forecast by Region (2027-2032) Table 157. Global Aluminum Die Casting Alloys Production Value Comparison by Region: 2021 VS 2025 VS 2032 (US$ Million) Table 158. Global Aluminum Die Casting Alloys Production Value by Region (2021-2026) & (US$ Million) Table 159. Global Aluminum Die Casting Alloys Production Value Market Share by Region (2021-2026) Table 160. Global Aluminum Die Casting Alloys Production Value Forecast by Region (2027-2032) & (US$ Million) Table 161. Global Aluminum Die Casting Alloys Market Average Price (USD/t) by Region (2021-2026) Table 162. Global Aluminum Die Casting Alloys Market Average Price (USD/t) by Region (2027-2032) Table 163. Global Aluminum Die Casting Alloys Consumption Comparison by Region: 2021 VS 2025 VS 2032 (t) Table 164. Global Aluminum Die Casting Alloys Consumption by Region (2021-2026) & (t) Table 165. Global Aluminum Die Casting Alloys Consumption Market Share by Region (2021-2026) Table 166. Global Aluminum Die Casting Alloys Forecasted Consumption by Region (2027-2032) & (t) Table 167. Global Aluminum Die Casting Alloys Forecasted Consumption Market Share by Region (2027-2032) Table 168. North America Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 169. North America Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 170. North America Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 171. Europe Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 172. Europe Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 173. Europe Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 174. Asia Pacific Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 175. Asia Pacific Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 176. Asia Pacific Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 177. South America, Middle East & Africa Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 178. South America, Middle East & Africa Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 179. South America, Middle East & Africa Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 180. Global Aluminum Die Casting Alloys Production by Type (2021-2026) & (t) Table 181. Global Aluminum Die Casting Alloys Production by Type (2027-2032) & (t) Table 182. Global Aluminum Die Casting Alloys Production Market Share by Type (2021-2026) Table 183. Global Aluminum Die Casting Alloys Production Market Share by Type (2027-2032) Table 184. Global Aluminum Die Casting Alloys Production Value by Type (2021-2026) & (US$ Million) Table 185. Global Aluminum Die Casting Alloys Production Value by Type (2027-2032) & (US$ Million) Table 186. Global Aluminum Die Casting Alloys Production Value Market Share by Type (2021-2026) Table 187. Global Aluminum Die Casting Alloys Production Value Market Share by Type (2027-2032) Table 188. Global Aluminum Die Casting Alloys Price by Type (2021-2026) & (USD/t) Table 189. Global Aluminum Die Casting Alloys Price by Type (2027-2032) & (USD/t) Table 190. Global Aluminum Die Casting Alloys Production by Application (2021-2026) & (t) Table 191. Global Aluminum Die Casting Alloys Production by Application (2027-2032) & (t) Table 192. Global Aluminum Die Casting Alloys Production Market Share by Application (2021-2026) Table 193. Global Aluminum Die Casting Alloys Production Market Share by Application (2027-2032) Table 194. Global Aluminum Die Casting Alloys Production Value by Application (2021-2026) & (US$ Million) Table 195. Global Aluminum Die Casting Alloys Production Value by Application (2027-2032) & (US$ Million) Table 196. Global Aluminum Die Casting Alloys Production Value Market Share by Application (2021-2026) Table 197. Global Aluminum Die Casting Alloys Production Value Market Share by Application (2027-2032) Table 198. Global Aluminum Die Casting Alloys Price by Application (2021-2026) & (USD/t) Table 199. Global Aluminum Die Casting Alloys Price by Application (2027-2032) & (USD/t) Table 200. Key Raw Materials Table 201. Raw Materials Key Suppliers Table 202. Aluminum Die Casting Alloys Distributors List Table 203. Aluminum Die Casting Alloys Customers List Table 204. Aluminum Die Casting Alloys Industry Trends Table 205. Aluminum Die Casting Alloys Industry Drivers Table 206. Aluminum Die Casting Alloys Industry Restraints Table 207. Authors List of This Report List of Figures Figure 1. Research Methodology Figure 2. Research Process Figure 3. Key Executives Interviewed Figure 4. Aluminum Die Casting Alloys Product Image Figure 5. Market Value Comparison by Type (2021 VS 2025 VS 2032) & (US$ Million) Figure 6. A356 Product Image Figure 7. A360 Product Image Figure 8. A380 Product Image Figure 9. A383 Product Image Figure 10. B390 Product Image Figure 11. A413 Product Image Figure 12. Other Product Image Figure 13. Automotive Product Image Figure 14. Telecommunications Product Image Figure 15. Home Appliances Product Image Figure 16. Medical Equipment Product Image Figure 17. Power Tools Product Image Figure 18. Others Product Image Figure 19. Global Aluminum Die Casting Alloys Production Value (US$ Million), 2021 VS 2025 VS 2032 Figure 20. Global Aluminum Die Casting Alloys Production Value (2021-2032) & (US$ Million) Figure 21. Global Aluminum Die Casting Alloys Production Capacity (2021-2032) & (t) Figure 22. Global Aluminum Die Casting Alloys Production (2021-2032) & (t) Figure 23. Global Aluminum Die Casting Alloys Average Price (USD/t) & (2021-2032) Figure 24. Global Aluminum Die Casting Alloys Key Manufacturers, Manufacturing Sites & Headquarters Figure 25. Global Top 5 and 10 Aluminum Die Casting Alloys Players Market Share by Production Value in 2025 Figure 26. Manufacturers Type (Tier 1, Tier 2, and Tier 3): 2021 VS 2025 Figure 27. Global Aluminum Die Casting Alloys Production Comparison by Region: 2021 VS 2025 VS 2032 (t) Figure 28. Global Aluminum Die Casting Alloys Production Market Share by Region: 2021 VS 2025 VS 2032 Figure 29. Global Aluminum Die Casting Alloys Production Value Comparison by Region: 2021 VS 2025 VS 2032 (US$ Million) Figure 30. Global Aluminum Die Casting Alloys Production Value Market Share by Region: 2021 VS 2025 VS 2032 Figure 31. North America Aluminum Die Casting Alloys Production Value (US$ Million) Growth Rate (2021-2032) Figure 32. Europe Aluminum Die Casting Alloys Production Value (US$ Million) Growth Rate (2021-2032) Figure 33. China Aluminum Die Casting Alloys Production Value (US$ Million) Growth Rate (2021-2032) Figure 34. Japan Aluminum Die Casting Alloys Production Value (US$ Million) Growth Rate (2021-2032) Figure 35. Global Aluminum Die Casting Alloys Consumption Comparison by Region: 2021 VS 2025 VS 2032 (t) Figure 36. Global Aluminum Die Casting Alloys Consumption Market Share by Region: 2021 VS 2025 VS 2032 Figure 37. North America Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 38. North America Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 39. United States Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 40. United States Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 41. Canada Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 42. Mexico Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 43. Europe Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 44. Europe Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 45. Germany Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 46. France Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 47. U.K. Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 48. Italy Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 49. Russia Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 50. Spain Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 51. Netherlands Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 52. Switzerland Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 53. Sweden Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 54. Poland Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 55. Asia Pacific Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 56. Asia Pacific Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 57. China Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 58. Japan Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 59. South Korea Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 60. India Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 61. Australia Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 62. Taiwan Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 63. Southeast Asia Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 64. South America, Middle East & Africa Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 65. South America, Middle East & Africa Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 66. Brazil Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 67. Argentina Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 68. Chile Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 69. Turkey Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 70. GCC Countries Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 71. Global Aluminum Die Casting Alloys Production Market Share by Type (2021-2032) Figure 72. Global Aluminum Die Casting Alloys Production Value Market Share by Type (2021-2032) Figure 73. Global Aluminum Die Casting Alloys Price (USD/t) by Type (2021-2032) Figure 74. Global Aluminum Die Casting Alloys Production Market Share by Application (2021-2032) Figure 75. Global Aluminum Die Casting Alloys Production Value Market Share by Application (2021-2032) Figure 76. Global Aluminum Die Casting Alloys Price (USD/t) by Application (2021-2032) Figure 77. Aluminum Die Casting Alloys Value Chain Figure 78. Aluminum Die Casting Alloys Production Mode & Process Figure 79. Direct Comparison with Distribution Share Figure 80. Distributors Profiles Figure 81. Aluminum Die Casting Alloys Industry Opportunities and Challenges

Scope & coverage.

Types
  • A356
  • A360
  • A380
  • A383
  • B390
  • A413
  • Other
Applications
  • Automotive
  • Telecommunications
  • Home Appliances
  • Medical Equipment
  • Power Tools
  • Others
Companies covered
  • Nemak
  • Xusheng
  • Ryobi
  • Ahresty
  • DGS
  • IKD
  • Guangdong Wencan
  • Georg Fischer
  • Jiangsu Rongtai
  • Martinrea
  • Teksid
  • Guangdong Hongtu
  • Millison Technologies
  • Handtmann
  • Yadelin
  • Aludyne
  • Rockman
  • MK Tron
  • Form Technologies
  • Sandhar
  • LTH Castings
  • Endurance
  • Eontec
  • Tatfook Technology
  • Foryou Corporation
  • Gibbs
  • Nanjing Chervon

Inside the report.

1 Preface
  1. 1.1 Scope of Report
  2. 1.2 Reasons for Doing This Study
  3. 1.3 Research Methodology
  4. 1.4 Research Process
  5. 1.5 Data Source
  6. 1.5.1 Secondary Sources
  7. 1.5.2 Primary Sources
2 Market Overview
  1. 2.1 Product Definition
  2. 2.2 Aluminum Die Casting Alloys by Type
  3. 2.2.1 Market Value Comparison by Type (2021 VS 2025 VS 2032) & (US$ Million)
  4. 2.2.2 A356
  5. 2.2.3 A360
  6. 2.2.4 A380
  7. 2.2.5 A383
  8. 2.2.6 B390
  9. 2.2.7 A413
  10. 2.2.8 Other
  11. 2.3 Aluminum Die Casting Alloys by Application
  12. 2.3.1 Market Value Comparison by Application (2021 VS 2025 VS 2032) & (US$ Million)
  13. 2.3.2 Automotive
  14. 2.3.3 Telecommunications
  15. 2.3.4 Home Appliances
  16. 2.3.5 Medical Equipment
  17. 2.3.6 Power Tools
  18. 2.3.7 Others
  19. 2.4 Global Market Growth Prospects
  20. 2.4.1 Global Aluminum Die Casting Alloys Production Value Estimates and Forecasts (2021-2032)
  21. 2.4.2 Global Aluminum Die Casting Alloys Production Capacity Estimates and Forecasts (2021-2032)
  22. 2.4.3 Global Aluminum Die Casting Alloys Production Estimates and Forecasts (2021-2032)
  23. 2.4.4 Global Aluminum Die Casting Alloys Market Average Price (2021-2032)
3 Market Competitive Landscape by Manufacturers
  1. 3.1 Global Aluminum Die Casting Alloys Production by Manufacturers (2021-2026)
  2. 3.2 Global Aluminum Die Casting Alloys Production Value by Manufacturers (2021-2026)
  3. 3.3 Global Aluminum Die Casting Alloys Average Price by Manufacturers (2021-2026)
  4. 3.4 Global Aluminum Die Casting Alloys Industry Manufacturers Ranking, 2024 VS 2025 VS 2026
  5. 3.5 Global Aluminum Die Casting Alloys Key Manufacturers, Manufacturing Sites & Headquarters
  6. 3.6 Global Aluminum Die Casting Alloys Manufacturers, Product Type & Application
  7. 3.7 Global Aluminum Die Casting Alloys Manufacturers Established Date
  8. 3.8 Global Aluminum Die Casting Alloys Market CR5 and HHI
  9. 3.9 Global Manufacturers Mergers & Acquisition
4 Manufacturers Profiled
  1. 4.1 Nemak
  2. 4.1.1 Nemak Aluminum Die Casting Alloys Company Information
  3. 4.1.2 Nemak Aluminum Die Casting Alloys Business Overview
  4. 4.1.3 Nemak Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  5. 4.1.4 Nemak Product Portfolio
  6. 4.1.5 Nemak Recent Developments
  7. 4.2 Xusheng
  8. 4.2.1 Xusheng Aluminum Die Casting Alloys Company Information
  9. 4.2.2 Xusheng Aluminum Die Casting Alloys Business Overview
  10. 4.2.3 Xusheng Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  11. 4.2.4 Xusheng Product Portfolio
  12. 4.2.5 Xusheng Recent Developments
  13. 4.3 Ryobi
  14. 4.3.1 Ryobi Aluminum Die Casting Alloys Company Information
  15. 4.3.2 Ryobi Aluminum Die Casting Alloys Business Overview
  16. 4.3.3 Ryobi Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  17. 4.3.4 Ryobi Product Portfolio
  18. 4.3.5 Ryobi Recent Developments
  19. 4.4 Ahresty
  20. 4.4.1 Ahresty Aluminum Die Casting Alloys Company Information
  21. 4.4.2 Ahresty Aluminum Die Casting Alloys Business Overview
  22. 4.4.3 Ahresty Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  23. 4.4.4 Ahresty Product Portfolio
  24. 4.4.5 Ahresty Recent Developments
  25. 4.5 DGS
  26. 4.5.1 DGS Aluminum Die Casting Alloys Company Information
  27. 4.5.2 DGS Aluminum Die Casting Alloys Business Overview
  28. 4.5.3 DGS Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  29. 4.5.4 DGS Product Portfolio
  30. 4.5.5 DGS Recent Developments
  31. 4.6 IKD
  32. 4.6.1 IKD Aluminum Die Casting Alloys Company Information
  33. 4.6.2 IKD Aluminum Die Casting Alloys Business Overview
  34. 4.6.3 IKD Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  35. 4.6.4 IKD Product Portfolio
  36. 4.6.5 IKD Recent Developments
  37. 4.7 Guangdong Wencan
  38. 4.7.1 Guangdong Wencan Aluminum Die Casting Alloys Company Information
  39. 4.7.2 Guangdong Wencan Aluminum Die Casting Alloys Business Overview
  40. 4.7.3 Guangdong Wencan Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  41. 4.7.4 Guangdong Wencan Product Portfolio
  42. 4.7.5 Guangdong Wencan Recent Developments
  43. 4.8 Georg Fischer
  44. 4.8.1 Georg Fischer Aluminum Die Casting Alloys Company Information
  45. 4.8.2 Georg Fischer Aluminum Die Casting Alloys Business Overview
  46. 4.8.3 Georg Fischer Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  47. 4.8.4 Georg Fischer Product Portfolio
  48. 4.8.5 Georg Fischer Recent Developments
  49. 4.9 Jiangsu Rongtai
  50. 4.9.1 Jiangsu Rongtai Aluminum Die Casting Alloys Company Information
  51. 4.9.2 Jiangsu Rongtai Aluminum Die Casting Alloys Business Overview
  52. 4.9.3 Jiangsu Rongtai Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  53. 4.9.4 Jiangsu Rongtai Product Portfolio
  54. 4.9.5 Jiangsu Rongtai Recent Developments
  55. 4.10 Martinrea
  56. 4.10.1 Martinrea Aluminum Die Casting Alloys Company Information
  57. 4.10.2 Martinrea Aluminum Die Casting Alloys Business Overview
  58. 4.10.3 Martinrea Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  59. 4.10.4 Martinrea Product Portfolio
  60. 4.10.5 Martinrea Recent Developments
  61. 4.11 Teksid
  62. 4.11.1 Teksid Aluminum Die Casting Alloys Company Information
  63. 4.11.2 Teksid Aluminum Die Casting Alloys Business Overview
  64. 4.11.3 Teksid Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  65. 4.11.4 Teksid Product Portfolio
  66. 4.11.5 Teksid Recent Developments
  67. 4.12 Guangdong Hongtu
  68. 4.12.1 Guangdong Hongtu Aluminum Die Casting Alloys Company Information
  69. 4.12.2 Guangdong Hongtu Aluminum Die Casting Alloys Business Overview
  70. 4.12.3 Guangdong Hongtu Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  71. 4.12.4 Guangdong Hongtu Product Portfolio
  72. 4.12.5 Guangdong Hongtu Recent Developments
  73. 4.13 Millison Technologies
  74. 4.13.1 Millison Technologies Aluminum Die Casting Alloys Company Information
  75. 4.13.2 Millison Technologies Aluminum Die Casting Alloys Business Overview
  76. 4.13.3 Millison Technologies Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  77. 4.13.4 Millison Technologies Product Portfolio
  78. 4.13.5 Millison Technologies Recent Developments
  79. 4.14 Handtmann
  80. 4.14.1 Handtmann Aluminum Die Casting Alloys Company Information
  81. 4.14.2 Handtmann Aluminum Die Casting Alloys Business Overview
  82. 4.14.3 Handtmann Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  83. 4.14.4 Handtmann Product Portfolio
  84. 4.14.5 Handtmann Recent Developments
  85. 4.15 Yadelin
  86. 4.15.1 Yadelin Aluminum Die Casting Alloys Company Information
  87. 4.15.2 Yadelin Aluminum Die Casting Alloys Business Overview
  88. 4.15.3 Yadelin Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  89. 4.15.4 Yadelin Product Portfolio
  90. 4.15.5 Yadelin Recent Developments
  91. 4.16 Aludyne
  92. 4.16.1 Aludyne Aluminum Die Casting Alloys Company Information
  93. 4.16.2 Aludyne Aluminum Die Casting Alloys Business Overview
  94. 4.16.3 Aludyne Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  95. 4.16.4 Aludyne Product Portfolio
  96. 4.16.5 Aludyne Recent Developments
  97. 4.17 Rockman
  98. 4.17.1 Rockman Aluminum Die Casting Alloys Company Information
  99. 4.17.2 Rockman Aluminum Die Casting Alloys Business Overview
  100. 4.17.3 Rockman Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  101. 4.17.4 Rockman Product Portfolio
  102. 4.17.5 Rockman Recent Developments
  103. 4.18 MK Tron
  104. 4.18.1 MK Tron Aluminum Die Casting Alloys Company Information
  105. 4.18.2 MK Tron Aluminum Die Casting Alloys Business Overview
  106. 4.18.3 MK Tron Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  107. 4.18.4 MK Tron Product Portfolio
  108. 4.18.5 MK Tron Recent Developments
  109. 4.19 Form Technologies
  110. 4.19.1 Form Technologies Aluminum Die Casting Alloys Company Information
  111. 4.19.2 Form Technologies Aluminum Die Casting Alloys Business Overview
  112. 4.19.3 Form Technologies Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  113. 4.19.4 Form Technologies Product Portfolio
  114. 4.19.5 Form Technologies Recent Developments
  115. 4.20 Sandhar
  116. 4.20.1 Sandhar Aluminum Die Casting Alloys Company Information
  117. 4.20.2 Sandhar Aluminum Die Casting Alloys Business Overview
  118. 4.20.3 Sandhar Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  119. 4.20.4 Sandhar Product Portfolio
  120. 4.20.5 Sandhar Recent Developments
  121. 4.21 LTH Castings
  122. 4.21.1 LTH Castings Aluminum Die Casting Alloys Company Information
  123. 4.21.2 LTH Castings Aluminum Die Casting Alloys Business Overview
  124. 4.21.3 LTH Castings Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  125. 4.21.4 LTH Castings Product Portfolio
  126. 4.21.5 LTH Castings Recent Developments
  127. 4.22 Endurance
  128. 4.22.1 Endurance Aluminum Die Casting Alloys Company Information
  129. 4.22.2 Endurance Aluminum Die Casting Alloys Business Overview
  130. 4.22.3 Endurance Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  131. 4.22.4 Endurance Product Portfolio
  132. 4.22.5 Endurance Recent Developments
  133. 4.23 Eontec
  134. 4.23.1 Eontec Aluminum Die Casting Alloys Company Information
  135. 4.23.2 Eontec Aluminum Die Casting Alloys Business Overview
  136. 4.23.3 Eontec Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  137. 4.23.4 Eontec Product Portfolio
  138. 4.23.5 Eontec Recent Developments
  139. 4.24 Tatfook Technology
  140. 4.24.1 Tatfook Technology Aluminum Die Casting Alloys Company Information
  141. 4.24.2 Tatfook Technology Aluminum Die Casting Alloys Business Overview
  142. 4.24.3 Tatfook Technology Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  143. 4.24.4 Tatfook Technology Product Portfolio
  144. 4.24.5 Tatfook Technology Recent Developments
  145. 4.25 Foryou Corporation
  146. 4.25.1 Foryou Corporation Aluminum Die Casting Alloys Company Information
  147. 4.25.2 Foryou Corporation Aluminum Die Casting Alloys Business Overview
  148. 4.25.3 Foryou Corporation Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  149. 4.25.4 Foryou Corporation Product Portfolio
  150. 4.25.5 Foryou Corporation Recent Developments
  151. 4.26 Gibbs
  152. 4.26.1 Gibbs Aluminum Die Casting Alloys Company Information
  153. 4.26.2 Gibbs Aluminum Die Casting Alloys Business Overview
  154. 4.26.3 Gibbs Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  155. 4.26.4 Gibbs Product Portfolio
  156. 4.26.5 Gibbs Recent Developments
  157. 4.27 Nanjing Chervon
  158. 4.27.1 Nanjing Chervon Aluminum Die Casting Alloys Company Information
  159. 4.27.2 Nanjing Chervon Aluminum Die Casting Alloys Business Overview
  160. 4.27.3 Nanjing Chervon Aluminum Die Casting Alloys Production Capacity, Value and Gross Margin (2021-2026)
  161. 4.27.4 Nanjing Chervon Product Portfolio
  162. 4.27.5 Nanjing Chervon Recent Developments
5 Global Aluminum Die Casting Alloys Production by Region
  1. 5.1 Global Aluminum Die Casting Alloys Production Estimates and Forecasts by Region: 2021 VS 2025 VS 2032
  2. 5.2 Global Aluminum Die Casting Alloys Production by Region: 2021-2032
  3. 5.2.1 Global Aluminum Die Casting Alloys Production by Region: 2021-2026
  4. 5.2.2 Global Aluminum Die Casting Alloys Production Forecast by Region (2027-2032)
  5. 5.3 Global Aluminum Die Casting Alloys Production Value Estimates and Forecasts by Region: 2021 VS 2025 VS 2032
  6. 5.4 Global Aluminum Die Casting Alloys Production Value by Region: 2021-2032
  7. 5.4.1 Global Aluminum Die Casting Alloys Production Value by Region: 2021-2026
  8. 5.4.2 Global Aluminum Die Casting Alloys Production Value Forecast by Region (2027-2032)
  9. 5.5 Global Aluminum Die Casting Alloys Market Price Analysis by Region (2021-2026)
  10. 5.6 Global Aluminum Die Casting Alloys Production and Value, YOY Growth
  11. 5.6.1 North America Aluminum Die Casting Alloys Production Value Estimates and Forecasts (2021-2032)
  12. 5.6.2 Europe Aluminum Die Casting Alloys Production Value Estimates and Forecasts (2021-2032)
  13. 5.6.3 China Aluminum Die Casting Alloys Production Value Estimates and Forecasts (2021-2032)
  14. 5.6.4 Japan Aluminum Die Casting Alloys Production Value Estimates and Forecasts (2021-2032)
6 Global Aluminum Die Casting Alloys Consumption by Region
  1. 6.1 Global Aluminum Die Casting Alloys Consumption Estimates and Forecasts by Region: 2021 VS 2025 VS 2032
  2. 6.2 Global Aluminum Die Casting Alloys Consumption by Region (2021-2032)
  3. 6.2.1 Global Aluminum Die Casting Alloys Consumption by Region: 2021-2026
  4. 6.2.2 Global Aluminum Die Casting Alloys Forecasted Consumption by Region (2027-2032)
  5. 6.3 North America
  6. 6.3.1 North America Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  7. 6.3.2 North America Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  8. 6.3.3 United States
  9. 6.3.4 Canada
  10. 6.3.5 Mexico
  11. 6.4 Europe
  12. 6.4.1 Europe Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  13. 6.4.2 Europe Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  14. 6.4.3 Germany
  15. 6.4.4 France
  16. 6.4.5 U.K.
  17. 6.4.6 Italy
  18. 6.4.7 Russia
  19. 6.4.8 Spain
  20. 6.4.9 Netherlands
  21. 6.4.10 Switzerland
  22. 6.4.11 Sweden
  23. 6.4.12 Poland
  24. 6.5 Asia Pacific
  25. 6.5.1 Asia Pacific Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  26. 6.5.2 Asia Pacific Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  27. 6.5.3 China
  28. 6.5.4 Japan
  29. 6.5.5 South Korea
  30. 6.5.6 India
  31. 6.5.7 Australia
  32. 6.5.8 Taiwan
  33. 6.5.9 Southeast Asia
  34. 6.6 South America, Middle East & Africa
  35. 6.6.1 South America, Middle East & Africa Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  36. 6.6.2 South America, Middle East & Africa Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  37. 6.6.3 Brazil
  38. 6.6.4 Argentina
  39. 6.6.5 Chile
  40. 6.6.6 Turkey
  41. 6.6.7 GCC Countries
7 Segment by Type
  1. 7.1 Global Aluminum Die Casting Alloys Production by Type (2021-2032)
  2. 7.1.1 Global Aluminum Die Casting Alloys Production by Type (2021-2032) & (t)
  3. 7.1.2 Global Aluminum Die Casting Alloys Production Market Share by Type (2021-2032)
  4. 7.2 Global Aluminum Die Casting Alloys Production Value by Type (2021-2032)
  5. 7.2.1 Global Aluminum Die Casting Alloys Production Value by Type (2021-2032) & (US$ Million)
  6. 7.2.2 Global Aluminum Die Casting Alloys Production Value Market Share by Type (2021-2032)
  7. 7.3 Global Aluminum Die Casting Alloys Price by Type (2021-2032)
8 Segment by Application
  1. 8.1 Global Aluminum Die Casting Alloys Production by Application (2021-2032)
  2. 8.1.1 Global Aluminum Die Casting Alloys Production by Application (2021-2032) & (t)
  3. 8.1.2 Global Aluminum Die Casting Alloys Production Market Share by Application (2021-2032)
  4. 8.2 Global Aluminum Die Casting Alloys Production Value by Application (2021-2032)
  5. 8.2.1 Global Aluminum Die Casting Alloys Production Value by Application (2021-2032) & (US$ Million)
  6. 8.2.2 Global Aluminum Die Casting Alloys Production Value Market Share by Application (2021-2032)
  7. 8.3 Global Aluminum Die Casting Alloys Price by Application (2021-2032)
9 Value Chain and Sales Channels Analysis of the Market
  1. 9.1 Aluminum Die Casting Alloys Value Chain Analysis
  2. 9.1.1 Aluminum Die Casting Alloys Key Raw Materials
  3. 9.1.2 Raw Materials Key Suppliers
  4. 9.1.3 Aluminum Die Casting Alloys Production Mode & Process
  5. 9.2 Aluminum Die Casting Alloys Sales Channels Analysis
  6. 9.2.1 Direct Comparison with Distribution Share
  7. 9.2.2 Aluminum Die Casting Alloys Distributors
  8. 9.2.3 Aluminum Die Casting Alloys Customers
10 Global Aluminum Die Casting Alloys Analyzing Market Dynamics
  1. 10.1 Aluminum Die Casting Alloys Industry Trends
  2. 10.2 Aluminum Die Casting Alloys Industry Drivers
  3. 10.3 Aluminum Die Casting Alloys Industry Opportunities and Challenges
  4. 10.4 Aluminum Die Casting Alloys Industry Restraints
11 Report Conclusion
    12 Disclaimer

      GET THE RESEARCH

      Choose your license.

      Choose who needs access.
      All options are for this report and research series.

      Compare access permissions.

      Single User License
      One named user. Individual access.
      Multi User License
      Up to 5 users in the same department.
      Enterprise License
      Organization-wide access within the agreed license.

      Access applies to the purchased edition. Later editions are separate purchases.

      License options
      $2,950USD
      Buy now

      PDF by email within 3–5 working days after payment confirmation.

      Talk to an analyst
      APO Research, Inc.
      Talk to an analyst