APO Research
Talk to an analyst

APO RESEARCH · REPORT

Aluminum Die Casting Alloys

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Explore the product
View pricing & licenses

Product & engineering

Understand the product.

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Silicon lowers liquidus temperature and increases fluidity while reducing hot-tearing susceptibility; typical contents range from approximately 7–12% for general-purpose castings to ~17–19% for abrasion-resistant applications. Copper additions raise strength and hardness via Al–Cu intermetallics with a corresponding reduction in ductility and corrosion tolerance. Magnesium supports age-hardening responses and, in vacuum-assisted or squeeze-cast conditions, enables heat-treatable structural performance. Iron, prevalent in recycled streams, is held within narrow limits to manage die soldering; manganese modifies Fe-bearing phases from plate-like β-Fe to less deleterious α-Fe morphologies. Nickel appears in elevated-temperature grades for strength retention and creep resistance. Grain refiners (Ti–B) and eutectic modifiers (Sr) adjust nucleation density and silicon morphology under the high cooling rates typical of die casting.

Process conditions influence alloy identity as directly as nominal composition. High-pressure die casting employs high gate velocities and intensification pressures that can entrain oxide films and gas; alloy windows and melt practice therefore converge on oxide-film toughness, wetting behavior, and freezing ranges compatible with thin-wall solidification. Low-pressure and squeeze casting operate at lower turbulence and accommodate thicker sections with reduced porosity. Vacuum-assisted HPDC and semi-solid routes reduce entrainment levels to thresholds that permit T5/T6 heat treatments, extending aluminum die casting alloys into large body-structure and e-powertrain domains.

Mechanical and physical properties arise from composition, section thickness, porosity, and cooling rate. As-cast Al–Si–Cu grades commonly exhibit ultimate tensile strength on the order of 250–330 MPa, yield strength around 120–180 MPa, and elongation approximately 1–5% in thin sections. Al–Si–Mg grades emphasize ductility and corrosion performance with lower copper contents. Very high-silicon alloys provide elevated hardness and wear resistance with limited elongation. Thermal conductivity typically lies near 80–130 W·m⁻¹·K⁻¹, the coefficient of thermal expansion near 21–24 μm·m⁻¹·K⁻¹, and density near 2.70–2.75 g·cm⁻³. At elevated temperatures, strength retention correlates with the stability of Cu-, Mg-, and Ni-bearing intermetallics and the porosity state established during casting.

Higher copper contents correlate with reduced chloride-environment tolerance relative to low-Cu Al–Si–Mg systems. The high silicon fraction and as-cast skin porosity of HPDC tend to produce gray, matte anodic finishes; impregnation, conversion coatings, e-coat, and powder coatings are widely used to stabilize appearance and seal leak paths. Weldability varies with gas content and oxide integrity in the casting skin and improves under vacuum-assisted practices.

Quality assurance in production employs compositional control (Fe/Mn balance, Zn, alkalis, Pb/Sn), melt cleanliness (degassing and fluxing to limit hydrogen and inclusions), and die thermal management to regulate fill and solidification gradients. Runner and overflow design, lubricant control, and vacuum systems govern porosity and soldering tendencies. Verification commonly uses tensile specimens from coupons or in-situ cast features, pressure-tightness tests for fluid-handling components, radiography or CT for internal integrity, and dimensional metrology to monitor die wear and thermal distortion.

In use, balanced Al–Si–Cu compositions are prevalent in housings, brackets, and appliance components; higher-silicon alloys appear frequently in thin-wall electronics enclosures and heat-dissipation parts; low-Cu Al–Si–Mg systems populate fluid manifolds and corrosion-sensitive environments; Ni-containing Al–Si–Cu–Ni grades occupy elevated-temperature zones in driveline and engine-adjacent service; vacuum-cast, heat-treatable Al–Si–Mg–Mn variants are established in structural body nodes and large e-powertrain enclosures.

Material sourcing in this sector relies heavily on secondary aluminum. Recycling loops introduce variability in Fe and minor elements, and industrial practice stabilizes these through dilution and targeted additions to maintain die life, surface quality, and mechanical consistency. In industrial terms, the “alloy” is defined jointly by nominal composition and the process-dependent microstructure and defect population produced under die-casting conditions.

Selected research

Industry Growth & Trends

Global Aluminum Die Casting Alloys Industry Growth and Trends Forecast to 2032

28 December 2025127 pages

Choose your research edition.

Industry ResearchAluminum Die Casting Alloys Industry Research Report 2026142 pages · $2,950 USDIndustry Growth & TrendsGlobal Aluminum Die Casting Alloys Industry Growth and Trends Forecast to 2032127 pages · $3,450 USDMarket StructureGlobal Aluminum Die Casting Alloys Market by Size, by Type, by Application, by Region, History and Forecast 2021-2032193 pages · $3,950 USDMarket Outlook & Growth OpportunitiesGlobal Aluminum Die Casting Alloys Market Outlook and Growth Opportunities 2026211 pages · $4,250 USDMarket Analysis & ForecastGlobal Aluminum Die Casting Alloys Market Analysis and Forecast 2026-2032214 pages · $4,950 USD

Market perspective

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Silicon lowers liquidus temperature and increases fluidity while reducing hot-tearing susceptibility; typical contents range from approximately 7–12% for general-purpose castings to ~17–19% for abrasion-resistant applications. Copper additions raise strength and hardness via Al–Cu intermetallics with a corresponding reduction in ductility and corrosion tolerance. Magnesium supports age-hardening responses and, in vacuum-assisted or squeeze-cast conditions, enables heat-treatable structural performance. Iron, prevalent in recycled streams, is held within narrow limits to manage die soldering; manganese modifies Fe-bearing phases from plate-like β-Fe to less deleterious α-Fe morphologies. Nickel appears in elevated-temperature grades for strength retention and creep resistance. Grain refiners (Ti–B) and eutectic modifiers (Sr) adjust nucleation density and silicon morphology under the high cooling rates typical of die casting.

Process conditions influence alloy identity as directly as nominal composition. High-pressure die casting employs high gate velocities and intensification pressures that can entrain oxide films and gas; alloy windows and melt practice therefore converge on oxide-film toughness, wetting behavior, and freezing ranges compatible with thin-wall solidification. Low-pressure and squeeze casting operate at lower turbulence and accommodate thicker sections with reduced porosity. Vacuum-assisted HPDC and semi-solid routes reduce entrainment levels to thresholds that permit T5/T6 heat treatments, extending aluminum die casting alloys into large body-structure and e-powertrain domains.

Read the full market overview

Mechanical and physical properties arise from composition, section thickness, porosity, and cooling rate. As-cast Al–Si–Cu grades commonly exhibit ultimate tensile strength on the order of 250–330 MPa, yield strength around 120–180 MPa, and elongation approximately 1–5% in thin sections. Al–Si–Mg grades emphasize ductility and corrosion performance with lower copper contents. Very high-silicon alloys provide elevated hardness and wear resistance with limited elongation. Thermal conductivity typically lies near 80–130 W·m⁻¹·K⁻¹, the coefficient of thermal expansion near 21–24 μm·m⁻¹·K⁻¹, and density near 2.70–2.75 g·cm⁻³. At elevated temperatures, strength retention correlates with the stability of Cu-, Mg-, and Ni-bearing intermetallics and the porosity state established during casting.

Higher copper contents correlate with reduced chloride-environment tolerance relative to low-Cu Al–Si–Mg systems. The high silicon fraction and as-cast skin porosity of HPDC tend to produce gray, matte anodic finishes; impregnation, conversion coatings, e-coat, and powder coatings are widely used to stabilize appearance and seal leak paths. Weldability varies with gas content and oxide integrity in the casting skin and improves under vacuum-assisted practices.

Quality assurance in production employs compositional control (Fe/Mn balance, Zn, alkalis, Pb/Sn), melt cleanliness (degassing and fluxing to limit hydrogen and inclusions), and die thermal management to regulate fill and solidification gradients. Runner and overflow design, lubricant control, and vacuum systems govern porosity and soldering tendencies. Verification commonly uses tensile specimens from coupons or in-situ cast features, pressure-tightness tests for fluid-handling components, radiography or CT for internal integrity, and dimensional metrology to monitor die wear and thermal distortion.

In use, balanced Al–Si–Cu compositions are prevalent in housings, brackets, and appliance components; higher-silicon alloys appear frequently in thin-wall electronics enclosures and heat-dissipation parts; low-Cu Al–Si–Mg systems populate fluid manifolds and corrosion-sensitive environments; Ni-containing Al–Si–Cu–Ni grades occupy elevated-temperature zones in driveline and engine-adjacent service; vacuum-cast, heat-treatable Al–Si–Mg–Mn variants are established in structural body nodes and large e-powertrain enclosures.

Material sourcing in this sector relies heavily on secondary aluminum. Recycling loops introduce variability in Fe and minor elements, and industrial practice stabilizes these through dilution and targeted additions to maintain die life, surface quality, and mechanical consistency. In industrial terms, the “alloy” is defined jointly by nominal composition and the process-dependent microstructure and defect population produced under die-casting conditions.

The global Aluminum Die Casting Alloys market was valued at US$ million in 2026 and is projected to reach US$ million by 2032, implying a CAGR of xx% over 2026-2032.

The North America market for Aluminum Die Casting Alloys is projected to increase from US$ million in 2026 to US$ million by 2032, corresponding to a CAGR of % over 2026-2032.

The Europe market for Aluminum Die Casting Alloys is projected to increase from US$ million in 2026 to US$ million by 2032, registering a CAGR of % over 2026-2032.

The Asia Pacific market for Aluminum Die Casting Alloys is projected to increase from US$ million in 2026 to US$ million by 2032, at a CAGR of % over 2026-2032.

Leading global manufacturers of Aluminum Die Casting Alloys include Nemak, Xusheng, Ryobi, Ahresty, DGS, IKD, Guangdong Wencan, Georg Fischer and Jiangsu Rongtai, among others. In 2025, the top three vendors together accounted for approximately % of global revenue.

Report Scope

This report provides a structured, data-driven view of the global Aluminum Die Casting Alloys market, combining harmonized quantitative metrics with targeted qualitative insight to support business and growth strategy, market positioning, and capital allocation.

The Aluminum Die Casting Alloys market size, estimates, and forecasts are presented in terms of sales volume (t) and revenue (US$ million), with 2025 as the base year and historical and forecast data for 2021-2032. The report segments the global Aluminum Die Casting Alloys market by Type, Application, region/country, and company, provides regional market sizes at the segment level, profiles the competitive landscape and key players and their market ranks, and reviews technology trends and new product developments relevant to Aluminum Die Casting Alloys.

Key Companies & Market Share Insights

This section analyzes the strategies and performance of leading manufacturers in the global Aluminum Die Casting Alloys market, including portfolio focus, innovation and product development, mergers and acquisitions, collaborations, and geographic expansion used to sustain or enhance competitive positions. It also summarizes recent corporate developments and key financial indicators and provides global revenue, price, and sales volume data by manufacturer for 2020-2025, enabling benchmarking of scale, pricing, and market share and supporting assessment of market concentration through indicators such as CR5 and CR10.

Aluminum Die Casting Alloys Market by Company

Nemak

Xusheng

Ryobi

Ahresty

DGS

IKD

Guangdong Wencan

Georg Fischer

Jiangsu Rongtai

Martinrea

Teksid

Guangdong Hongtu

Millison Technologies

Handtmann

Yadelin

Aludyne

Rockman

MK Tron

Form Technologies

Sandhar

LTH Castings

Endurance

Eontec

Tatfook Technology

Foryou Corporation

Gibbs

Nanjing Chervon

Aluminum Die Casting Alloys Segment by Type

A356

A360

A380

A383

B390

A413

Other

Aluminum Die Casting Alloys Segment by Application

Automotive

Telecommunications

Home Appliances

Medical Equipment

Power Tools

Others

Aluminum Die Casting Alloys Segment by Region

North America

United States

Canada

Mexico

Europe

Germany

France

U.K.

Italy

Russia

Spain

Netherlands

Switzerland

Sweden

Poland

Asia-Pacific

China

Japan

South Korea

India

Australia

Taiwan

Southeast Asia

South America

Brazil

Argentina

Chile

Colombia

Middle East & Africa

Egypt

South Africa

Israel

Türkiye

GCC Countries

Key Drivers & Barriers

High-impact rendering factors and drivers have been studied in this report to aid the readers to understand the general development. Moreover, the report includes restraints and challenges that may act as stumbling blocks on the way of the players. This will assist the users to be attentive and make informed decisions related to business. Specialists have also laid their focus on the upcoming business prospects.

Reasons to Buy This Report

1. This report will help the readers to understand the competition within the industries and strategies for the competitive environment to enhance the potential profit. The report also focuses on the competitive landscape of the global Aluminum Die Casting Alloys market, and introduces in detail the market share, industry ranking, competitor ecosystem, market performance, new product development, operation situation, expansion, and acquisition. etc. of the main players, which helps the readers to identify the main competitors and deeply understand the competition pattern of the market.

2. This report will help stakeholders to understand the global industry status and trends of Aluminum Die Casting Alloys and provides them with information on key market drivers, restraints, challenges, and opportunities.

3. This report will help stakeholders to understand competitors better and gain more insights to strengthen their position in their businesses. The competitive landscape section includes the market share and rank (in volume and value), competitor ecosystem, new product development, expansion, and acquisition.

4. This report stays updated with novel technology integration, features, and the latest developments in the market.

5. This report helps stakeholders to gain insights into which regions to target globally.

6. This report helps stakeholders to gain insights into the end-user perception concerning the adoption of Aluminum Die Casting Alloys.

7. This report helps stakeholders to identify some of the key players in the market and understand their valuable contribution.

Chapter Outline

Chapter 1: Introduces the study scope of this report, executive summary of market segments by type, market size segments for North America, Europe, Asia Pacific, South America, Middle East & Africa.

Chapter 2: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.

Chapter 3: Detailed analysis of Aluminum Die Casting Alloys manufacturers competitive landscape, price, sales, revenue, market share and ranking, latest development plan, merger, and acquisition information, etc.

Chapter 4: Sales, revenue of Aluminum Die Casting Alloys in regional level. It provides a quantitative analysis of the market size and development potential of each region and introduces the future development prospects, and market space in the world.

Chapter 5: Introduces market segments by application, market size segment for North America, Europe, Asia Pacific, South America, Middle East & Africa.

Chapter 6: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product sales, revenue, price, gross margin, product introduction, recent development, etc.

Chapter 7, 8, 9, 10 and 11: North America, Europe, Asia Pacific, South America, Middle East & Africa, sales and revenue by country.

Chapter 12: Analysis of industrial chain, key raw materials, manufacturing cost, and market dynamics.

Chapter 13: Concluding Insights of the report.

More report detail

Tables and figures
List of Tables Table 1. Major Company of A356 Table 2. Major Company of A360 Table 3. Major Company of A380 Table 4. Major Company of A383 Table 5. Major Company of B390 Table 6. Major Company of A413 Table 7. Major Company of Other Table 8. Global Aluminum Die Casting Alloys Sales by Type (2021 VS 2025 VS 2032) & (US$ Million) Table 9. Global Aluminum Die Casting Alloys Sales by Type (2021-2026) & (t) Table 10. Global Aluminum Die Casting Alloys Sales Market Share in Volume by Type (2021-2026) Table 11. Global Aluminum Die Casting Alloys Sales by Type (2021-2026) & (US$ Million) Table 12. Global Aluminum Die Casting Alloys Sales Market Share in Value by Type (2021-2026) Table 13. Global Aluminum Die Casting Alloys Price by Type (2021-2026) & (USD/t) Table 14. Global Aluminum Die Casting Alloys Sales by Type (2027-2032) & (t) Table 15. Global Aluminum Die Casting Alloys Sales Market Share in Volume by Type (2027-2032) Table 16. Global Aluminum Die Casting Alloys Sales by Type (2027-2032) & (US$ Million) Table 17. Global Aluminum Die Casting Alloys Sales Market Share in Value by Type (2027-2032) Table 18. Global Aluminum Die Casting Alloys Price by Type (2027-2032) & (USD/t) Table 19. North America Aluminum Die Casting Alloys Sales by Type (2021-2026) & (t) Table 20. North America Aluminum Die Casting Alloys Sales by Type (2021-2026) & (US$ Million) Table 21. Europe Aluminum Die Casting Alloys Sales by Type (2021-2026) & (t) Table 22. Europe Aluminum Die Casting Alloys Sales by Type (2021-2026) & (US$ Million) Table 23. Asia-Pacific Aluminum Die Casting Alloys Sales by Type (2021-2026) & (t) Table 24. Asia-Pacific Aluminum Die Casting Alloys Sales by Type (2021-2026) & (US$ Million) Table 25. Latin America Aluminum Die Casting Alloys Sales by Type (2021-2026) & (t) Table 26. Latin America Aluminum Die Casting Alloys Sales by Type (2021-2026) & (US$ Million) Table 27. Middle East and Africa Aluminum Die Casting Alloys Sales by Type (2021-2026) & (t) Table 28. Middle East and Africa Aluminum Die Casting Alloys Sales by Type (2021-2026) & (US$ Million) Table 29. Aluminum Die Casting Alloys Industry Trends Table 30. Aluminum Die Casting Alloys Industry Drivers Table 31. Aluminum Die Casting Alloys Industry Opportunities and Challenges Table 32. Aluminum Die Casting Alloys Industry Restraints Table 33. Global Aluminum Die Casting Alloys Sales Revenue by Company (US$ Million) & (2021-2026) Table 34. Global Aluminum Die Casting Alloys Revenue Market Share by Company (2021-2026) Table 35. Global Aluminum Die Casting Alloys Sales by Company (2021-2026) & (t) Table 36. Global Aluminum Die Casting Alloys Sales Share by Company (2021-2026) Table 37. Global Aluminum Die Casting Alloys Market Price by Company (2021-2026) & (USD/t) Table 38. Global Aluminum Die Casting Alloys Industry Company Ranking, 2024 VS 2025 VS 2026 Table 39. Global Aluminum Die Casting Alloys Major Company Production Sites and Headquarters Table 40. Global Aluminum Die Casting Alloys Company, Product Type & Application Table 41. Global Aluminum Die Casting Alloys Company Establishment Date Table 42. Global Company Market Concentration Ratio (CR5 and HHI) Table 43. Global Aluminum Die Casting Alloys by Company Type (Tier 1, Tier 2, and Tier 3) & (Based on the Revenue of 2025) Table 44. Global Aluminum Die Casting Alloys Market Size Comparison by Region (US$ Million): 2021 VS 2025 VS 2032 Table 45. Global Aluminum Die Casting Alloys Sales by Region (2021-2026) & (t) Table 46. Global Aluminum Die Casting Alloys Sales Market Share in Volume by Region (2021-2026) Table 47. Global Aluminum Die Casting Alloys Sales by Region (2021-2026) & (US$ Million) Table 48. Global Aluminum Die Casting Alloys Sales Market Share in Value by Region (2021-2026) Table 49. Global Aluminum Die Casting Alloys Sales (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 50. Global Aluminum Die Casting Alloys Sales by Region (2027-2032) & (t) Table 51. Global Aluminum Die Casting Alloys Sales Market Share in Volume by Region (2027-2032) Table 52. Global Aluminum Die Casting Alloys Sales by Region (2027-2032) & (US$ Million) Table 53. Global Aluminum Die Casting Alloys Sales Market Share in Value by Region (2027-2032) Table 54. Global Aluminum Die Casting Alloys Sales (t), Value (US$ Million), Price (USD/t) and Gross Margin (2027-2032) Table 55. Global Aluminum Die Casting Alloys Sales by Application (2021 VS 2025 VS 2032) & (US$ Million) Table 56. Global Aluminum Die Casting Alloys Sales by Application (2021-2026) & (t) Table 57. Global Aluminum Die Casting Alloys Sales Market Share in Volume by Application (2021-2026) Table 58. Global Aluminum Die Casting Alloys Sales by Application (2021-2026) & (US$ Million) Table 59. Global Aluminum Die Casting Alloys Sales Market Share in Value by Application (2021-2026) Table 60. Global Aluminum Die Casting Alloys Price by Application (2021-2026) & (USD/t) Table 61. Global Aluminum Die Casting Alloys Sales by Application (2027-2032) & (t) Table 62. Global Aluminum Die Casting Alloys Sales Market Share in Volume by Application (2027-2032) Table 63. Global Aluminum Die Casting Alloys Sales by Application (2027-2032) & (US$ Million) Table 64. Global Aluminum Die Casting Alloys Sales Market Share in Value by Application (2027-2032) Table 65. Global Aluminum Die Casting Alloys Price by Application (2027-2032) & (USD/t) Table 66. North America Aluminum Die Casting Alloys Sales by Application (2021-2026) & (t) Table 67. North America Aluminum Die Casting Alloys Sales by Application (2021-2026) & (US$ Million) Table 68. Europe Aluminum Die Casting Alloys Sales by Application (2021-2026) & (t) Table 69. Europe Aluminum Die Casting Alloys Sales by Application (2021-2026) & (US$ Million) Table 70. Asia-Pacific Aluminum Die Casting Alloys Sales by Application (2021-2026) & (t) Table 71. Asia-Pacific Aluminum Die Casting Alloys Sales by Application (2021-2026) & (US$ Million) Table 72. Latin America Aluminum Die Casting Alloys Sales by Application (2021-2026) & (t) Table 73. Latin America Aluminum Die Casting Alloys Sales by Application (2021-2026) & (US$ Million) Table 74. Middle East and Africa Aluminum Die Casting Alloys Sales by Application (2021-2026) & (t) Table 75. Middle East and Africa Aluminum Die Casting Alloys Sales by Application (2021-2026) & (US$ Million) Table 76. Nemak Company Information Table 77. Nemak Business Overview Table 78. Nemak Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 79. Nemak Aluminum Die Casting Alloys Product Portfolio Table 80. Nemak Recent Development Table 81. Xusheng Company Information Table 82. Xusheng Business Overview Table 83. Xusheng Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 84. Xusheng Aluminum Die Casting Alloys Product Portfolio Table 85. Xusheng Recent Development Table 86. Ryobi Company Information Table 87. Ryobi Business Overview Table 88. Ryobi Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 89. Ryobi Aluminum Die Casting Alloys Product Portfolio Table 90. Ryobi Recent Development Table 91. Ahresty Company Information Table 92. Ahresty Business Overview Table 93. Ahresty Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 94. Ahresty Aluminum Die Casting Alloys Product Portfolio Table 95. Ahresty Recent Development Table 96. DGS Company Information Table 97. DGS Business Overview Table 98. DGS Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 99. DGS Aluminum Die Casting Alloys Product Portfolio Table 100. DGS Recent Development Table 101. IKD Company Information Table 102. IKD Business Overview Table 103. IKD Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 104. IKD Aluminum Die Casting Alloys Product Portfolio Table 105. IKD Recent Development Table 106. Guangdong Wencan Company Information Table 107. Guangdong Wencan Business Overview Table 108. Guangdong Wencan Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 109. Guangdong Wencan Aluminum Die Casting Alloys Product Portfolio Table 110. Guangdong Wencan Recent Development Table 111. Georg Fischer Company Information Table 112. Georg Fischer Business Overview Table 113. Georg Fischer Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 114. Georg Fischer Aluminum Die Casting Alloys Product Portfolio Table 115. Georg Fischer Recent Development Table 116. Jiangsu Rongtai Company Information Table 117. Jiangsu Rongtai Business Overview Table 118. Jiangsu Rongtai Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 119. Jiangsu Rongtai Aluminum Die Casting Alloys Product Portfolio Table 120. Jiangsu Rongtai Recent Development Table 121. Martinrea Company Information Table 122. Martinrea Business Overview Table 123. Martinrea Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 124. Martinrea Aluminum Die Casting Alloys Product Portfolio Table 125. Martinrea Recent Development Table 126. Teksid Company Information Table 127. Teksid Business Overview Table 128. Teksid Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 129. Teksid Aluminum Die Casting Alloys Product Portfolio Table 130. Teksid Recent Development Table 131. Guangdong Hongtu Company Information Table 132. Guangdong Hongtu Business Overview Table 133. Guangdong Hongtu Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 134. Guangdong Hongtu Aluminum Die Casting Alloys Product Portfolio Table 135. Guangdong Hongtu Recent Development Table 136. Millison Technologies Company Information Table 137. Millison Technologies Business Overview Table 138. Millison Technologies Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 139. Millison Technologies Aluminum Die Casting Alloys Product Portfolio Table 140. Millison Technologies Recent Development Table 141. Handtmann Company Information Table 142. Handtmann Business Overview Table 143. Handtmann Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 144. Handtmann Aluminum Die Casting Alloys Product Portfolio Table 145. Handtmann Recent Development Table 146. Yadelin Company Information Table 147. Yadelin Business Overview Table 148. Yadelin Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 149. Yadelin Aluminum Die Casting Alloys Product Portfolio Table 150. Yadelin Recent Development Table 151. Aludyne Company Information Table 152. Aludyne Business Overview Table 153. Aludyne Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 154. Aludyne Aluminum Die Casting Alloys Product Portfolio Table 155. Aludyne Recent Development Table 156. Rockman Company Information Table 157. Rockman Business Overview Table 158. Rockman Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 159. Rockman Aluminum Die Casting Alloys Product Portfolio Table 160. Rockman Recent Development Table 161. MK Tron Company Information Table 162. MK Tron Business Overview Table 163. MK Tron Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 164. MK Tron Aluminum Die Casting Alloys Product Portfolio Table 165. MK Tron Recent Development Table 166. Form Technologies Company Information Table 167. Form Technologies Business Overview Table 168. Form Technologies Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 169. Form Technologies Aluminum Die Casting Alloys Product Portfolio Table 170. Form Technologies Recent Development Table 171. Sandhar Company Information Table 172. Sandhar Business Overview Table 173. Sandhar Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 174. Sandhar Aluminum Die Casting Alloys Product Portfolio Table 175. Sandhar Recent Development Table 176. LTH Castings Company Information Table 177. LTH Castings Business Overview Table 178. LTH Castings Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 179. LTH Castings Aluminum Die Casting Alloys Product Portfolio Table 180. LTH Castings Recent Development Table 181. Endurance Company Information Table 182. Endurance Business Overview Table 183. Endurance Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 184. Endurance Aluminum Die Casting Alloys Product Portfolio Table 185. Endurance Recent Development Table 186. Eontec Company Information Table 187. Eontec Business Overview Table 188. Eontec Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 189. Eontec Aluminum Die Casting Alloys Product Portfolio Table 190. Eontec Recent Development Table 191. Tatfook Technology Company Information Table 192. Tatfook Technology Business Overview Table 193. Tatfook Technology Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 194. Tatfook Technology Aluminum Die Casting Alloys Product Portfolio Table 195. Tatfook Technology Recent Development Table 196. Foryou Corporation Company Information Table 197. Foryou Corporation Business Overview Table 198. Foryou Corporation Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 199. Foryou Corporation Aluminum Die Casting Alloys Product Portfolio Table 200. Foryou Corporation Recent Development Table 201. Gibbs Company Information Table 202. Gibbs Business Overview Table 203. Gibbs Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 204. Gibbs Aluminum Die Casting Alloys Product Portfolio Table 205. Gibbs Recent Development Table 206. Nanjing Chervon Company Information Table 207. Nanjing Chervon Business Overview Table 208. Nanjing Chervon Aluminum Die Casting Alloys Sales (t), Revenue (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 209. Nanjing Chervon Aluminum Die Casting Alloys Product Portfolio Table 210. Nanjing Chervon Recent Development Table 211. North America Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (t): 2021 VS 2025 VS 2032 Table 212. North America Aluminum Die Casting Alloys Sales by Country (2021-2026) & (t) Table 213. North America Aluminum Die Casting Alloys Sales Market Share by Country (2021-2026) Table 214. North America Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032) & (t) Table 215. North America Aluminum Die Casting Alloys Sales Market Share Forecast by Country (2027-2032) Table 216. North America Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (US$ Million): 2021 VS 2025 VS 2032 Table 217. North America Aluminum Die Casting Alloys Market Size by Country (2021-2026) & (US$ Million) Table 218. North America Aluminum Die Casting Alloys Market Share by Country (2021-2026) Table 219. North America Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032) & (US$ Million) Table 220. North America Aluminum Die Casting Alloys Market Share Forecast by Country (2027-2032) Table 221. Europe Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (t): 2021 VS 2025 VS 2032 Table 222. Europe Aluminum Die Casting Alloys Sales by Country (2021-2026) & (t) Table 223. Europe Aluminum Die Casting Alloys Sales Market Share by Country (2021-2026) Table 224. Europe Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032) & (t) Table 225. Europe Aluminum Die Casting Alloys Sales Market Share Forecast by Country (2027-2032) Table 226. Europe Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (US$ Million): 2021 VS 2025 VS 2032 Table 227. Europe Aluminum Die Casting Alloys Market Size by Country (2021-2026) & (US$ Million) Table 228. Europe Aluminum Die Casting Alloys Market Share by Country (2021-2026) Table 229. Europe Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032) & (US$ Million) Table 230. Europe Aluminum Die Casting Alloys Market Share Forecast by Country (2027-2032) Table 231. Asia-Pacific Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (t): 2021 VS 2025 VS 2032 Table 232. Asia-Pacific Aluminum Die Casting Alloys Sales by Country (2021-2026) & (t) Table 233. Asia-Pacific Aluminum Die Casting Alloys Sales Market Share by Country (2021-2026) Table 234. Asia-Pacific Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032) & (t) Table 235. Asia-Pacific Aluminum Die Casting Alloys Sales Market Share Forecast by Country (2027-2032) Table 236. Asia-Pacific Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (US$ Million): 2021 VS 2025 VS 2032 Table 237. Asia-Pacific Aluminum Die Casting Alloys Market Size by Country (2021-2026) & (US$ Million) Table 238. Asia-Pacific Aluminum Die Casting Alloys Market Share by Country (2021-2026) Table 239. Asia-Pacific Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032) & (US$ Million) Table 240. Asia-Pacific Aluminum Die Casting Alloys Market Share Forecast by Country (2027-2032) Table 241. Latin America Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (t): 2021 VS 2025 VS 2032 Table 242. Latin America Aluminum Die Casting Alloys Sales by Country (2021-2026) & (t) Table 243. Latin America Aluminum Die Casting Alloys Sales Market Share by Country (2021-2026) Table 244. Latin America Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032) & (t) Table 245. Latin America Aluminum Die Casting Alloys Sales Market Share Forecast by Country (2027-2032) Table 246. Latin America Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (US$ Million): 2021 VS 2025 VS 2032 Table 247. Latin America Aluminum Die Casting Alloys Market Size by Country (2021-2026) & (US$ Million) Table 248. Latin America Aluminum Die Casting Alloys Market Share by Country (2021-2026) Table 249. Latin America Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032) & (US$ Million) Table 250. Latin America Aluminum Die Casting Alloys Market Share Forecast by Country (2027-2032) Table 251. Middle East and Africa Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (t): 2021 VS 2025 VS 2032 Table 252. Middle East and Africa Aluminum Die Casting Alloys Sales by Country (2021-2026) & (t) Table 253. Middle East and Africa Aluminum Die Casting Alloys Sales Market Share by Country (2021-2026) Table 254. Middle East and Africa Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032) & (t) Table 255. Middle East and Africa Aluminum Die Casting Alloys Sales Market Share Forecast by Country (2027-2032) Table 256. Middle East and Africa Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country (US$ Million): 2021 VS 2025 VS 2032 Table 257. Middle East and Africa Aluminum Die Casting Alloys Market Size by Country (2021-2026) & (US$ Million) Table 258. Middle East and Africa Aluminum Die Casting Alloys Market Share by Country (2021-2026) Table 259. Middle East and Africa Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032) & (US$ Million) Table 260. Middle East and Africa Aluminum Die Casting Alloys Market Share Forecast by Country (2027-2032) Table 261. Key Raw Materials Table 262. Raw Materials Key Suppliers Table 263. Aluminum Die Casting Alloys Distributors List Table 264. Aluminum Die Casting Alloys Customers List Table 265. Research Programs/Design for This Report Table 266. Authors List of This Report Table 267. Secondary Sources Table 268. Primary Sources List of Figures Figure 1. Aluminum Die Casting Alloys Image Figure 2. Global Aluminum Die Casting Alloys Market Size (US$ Million), 2021 VS 2025 VS 2032 Figure 3. Global Aluminum Die Casting Alloys Market Size (2021-2032) & (US$ Million) Figure 4. Global Aluminum Die Casting Alloys Sales (2021-2032) & (t) Figure 5. A356 Image Figure 6. Global A356 Sales YoY Growth (2021-2032) & (t) Figure 7. A360 Image Figure 8. Global A360 Sales YoY Growth (2021-2032) & (t) Figure 9. A380 Image Figure 10. Global A380 Sales YoY Growth (2021-2032) & (t) Figure 11. A383 Image Figure 12. Global A383 Sales YoY Growth (2021-2032) & (t) Figure 13. B390 Image Figure 14. Global B390 Sales YoY Growth (2021-2032) & (t) Figure 15. A413 Image Figure 16. Global A413 Sales YoY Growth (2021-2032) & (t) Figure 17. Other Image Figure 18. Global Other Sales YoY Growth (2021-2032) & (t) Figure 19. Global Aluminum Die Casting Alloys Market Size Overview by Type (2021-2032) & (US$ Million) Figure 20. Global Aluminum Die Casting Alloys Market Share by Type 2025 VS 2032 Figure 21. North America Aluminum Die Casting Alloys Sales Market Share in Volume by Type in 2025 Figure 22. North America Aluminum Die Casting Alloys Sales Market Share in Value by Type in 2025 Figure 23. Europe Aluminum Die Casting Alloys Sales Market Share in Volume by Type in 2025 Figure 24. Europe Aluminum Die Casting Alloys Sales Market Share in Value by Type in 2025 Figure 25. Asia-Pacific Aluminum Die Casting Alloys Sales Market Share in Volume by Type in 2025 Figure 26. Asia-Pacific Aluminum Die Casting Alloys Sales Market Share in Value by Type in 2025 Figure 27. Latin America Aluminum Die Casting Alloys Sales Market Share in Volume by Type in 2025 Figure 28. Latin America Aluminum Die Casting Alloys Sales Market Share in Value by Type in 2025 Figure 29. Middle East and Africa Aluminum Die Casting Alloys Sales Market Share in Volume by Type in 2025 Figure 30. Middle East and Africa Aluminum Die Casting Alloys Sales Market Share in Value by Type in 2025 Figure 31. Global Top 5 and 10 Aluminum Die Casting Alloys Players Market Share by Revenue in 2025 Figure 32. Company Type (Tier 1, Tier 2, and Tier 3): 2021 VS 2025 Figure 33. Automotive Image Figure 34. Global Automotive Sales YoY Growth (2021-2032) & (t) Figure 35. Telecommunications Image Figure 36. Global Telecommunications Sales YoY Growth (2021-2032) & (t) Figure 37. Home Appliances Image Figure 38. Global Home Appliances Sales YoY Growth (2021-2032) & (t) Figure 39. Medical Equipment Image Figure 40. Global Medical Equipment Sales YoY Growth (2021-2032) & (t) Figure 41. Power Tools Image Figure 42. Global Power Tools Sales YoY Growth (2021-2032) & (t) Figure 43. Others Image Figure 44. Global Others Sales YoY Growth (2021-2032) & (t) Figure 45. Global Aluminum Die Casting Alloys Market Size Overview by Application (2021-2032) & (US$ Million) Figure 46. Global Aluminum Die Casting Alloys Market Share by Application 2025 VS 2032 Figure 47. North America Aluminum Die Casting Alloys Sales Market Share in Volume by Application in 2025 Figure 48. North America Aluminum Die Casting Alloys Sales Market Share in Value by Application in 2025 Figure 49. Europe Aluminum Die Casting Alloys Sales Market Share in Volume by Application in 2025 Figure 50. Europe Aluminum Die Casting Alloys Sales Market Share in Value by Application in 2025 Figure 51. Asia-Pacific Aluminum Die Casting Alloys Sales Market Share in Volume by Application in 2025 Figure 52. Asia-Pacific Aluminum Die Casting Alloys Sales Market Share in Value by Application in 2025 Figure 53. Latin America Aluminum Die Casting Alloys Sales Market Share in Volume by Application in 2025 Figure 54. Latin America Aluminum Die Casting Alloys Sales Market Share in Value by Application in 2025 Figure 55. Middle East and Africa Aluminum Die Casting Alloys Sales Market Share in Volume by Application in 2025 Figure 56. Middle East and Africa Aluminum Die Casting Alloys Sales Market Share in Value by Application in 2025 Figure 57. North America Aluminum Die Casting Alloys Sales by Country: 2021 VS 2025 VS 2032 (t) Figure 58. North America Aluminum Die Casting Alloys Sales Share by Country: 2021 VS 2025 VS 2032 Figure 59. North America Aluminum Die Casting Alloys Market Size by Country: 2021 VS 2025 VS 2032 (US$ Million) Figure 60. North America Aluminum Die Casting Alloys Market Share by Country: 2021 VS 2025 VS 2032 Figure 61. Europe Aluminum Die Casting Alloys Sales by Country: 2021 VS 2025 VS 2032 (t) Figure 62. Europe Aluminum Die Casting Alloys Sales Share by Country: 2021 VS 2025 VS 2032 Figure 63. Europe Aluminum Die Casting Alloys Market Size by Country: 2021 VS 2025 VS 2032 (US$ Million) Figure 64. Europe Aluminum Die Casting Alloys Market Share by Country: 2021 VS 2025 VS 2032 Figure 65. Asia-Pacific Aluminum Die Casting Alloys Sales by Country: 2021 VS 2025 VS 2032 (t) Figure 66. Asia-Pacific Aluminum Die Casting Alloys Sales Share by Country: 2021 VS 2025 VS 2032 Figure 67. Asia-Pacific Aluminum Die Casting Alloys Market Size by Country: 2021 VS 2025 VS 2032 (US$ Million) Figure 68. Asia-Pacific Aluminum Die Casting Alloys Market Share by Country: 2021 VS 2025 VS 2032 Figure 69. Latin America Aluminum Die Casting Alloys Sales by Country: 2021 VS 2025 VS 2032 (t) Figure 70. Latin America Aluminum Die Casting Alloys Sales Share by Country: 2021 VS 2025 VS 2032 Figure 71. Latin America Aluminum Die Casting Alloys Market Size by Country: 2021 VS 2025 VS 2032 (US$ Million) Figure 72. Latin America Aluminum Die Casting Alloys Market Share by Country: 2021 VS 2025 VS 2032 Figure 73. Middle East and Africa Aluminum Die Casting Alloys Sales by Country: 2021 VS 2025 VS 2032 (t) Figure 74. Middle East and Africa Aluminum Die Casting Alloys Sales Share by Country: 2021 VS 2025 VS 2032 Figure 75. Middle East and Africa Aluminum Die Casting Alloys Market Size by Country: 2021 VS 2025 VS 2032 (US$ Million) Figure 76. Middle East and Africa Aluminum Die Casting Alloys Market Share by Country: 2021 VS 2025 VS 2032 Figure 77. Aluminum Die Casting Alloys Value Chain Figure 78. Key Raw Materials Price Figure 79. Manufacturing Cost Structure Figure 80. Aluminum Die Casting Alloys Production Mode & Process Figure 81. Direct Comparison with Distribution Share Figure 82. Distributors Profiles Figure 83. Years Considered Figure 84. Research Process Figure 85. Key Executives Interviewed

Scope & coverage.

Types
  • A356
  • A360
  • A380
  • A383
  • B390
  • A413
  • Other
Applications
  • Automotive
  • Telecommunications
  • Home Appliances
  • Medical Equipment
  • Power Tools
  • Others
Companies covered
  • Nemak
  • Xusheng
  • Ryobi
  • Ahresty
  • DGS
  • IKD
  • Guangdong Wencan
  • Georg Fischer
  • Jiangsu Rongtai
  • Martinrea
  • Teksid
  • Guangdong Hongtu
  • Millison Technologies
  • Handtmann
  • Yadelin
  • Aludyne
  • Rockman
  • MK Tron
  • Form Technologies
  • Sandhar
  • LTH Castings
  • Endurance
  • Eontec
  • Tatfook Technology
  • Foryou Corporation
  • Gibbs
  • Nanjing Chervon

Inside the report.

1 Market Overview
  1. 1.1 Product Definition
  2. 1.2 Global Market Growth Prospects
  3. 1.2.1 Global Aluminum Die Casting Alloys Market Size Estimates and Forecasts (2021-2032)
  4. 1.2.2 Global Aluminum Die Casting Alloys Sales Estimates and Forecasts (2021-2032)
  5. 1.3 Aluminum Die Casting Alloys Market by Type
  6. 1.3.1 A356
  7. 1.3.2 A360
  8. 1.3.3 A380
  9. 1.3.4 A383
  10. 1.3.5 B390
  11. 1.3.6 A413
  12. 1.3.7 Other
  13. 1.4 Global Aluminum Die Casting Alloys Market Size by Type
  14. 1.4.1 Global Aluminum Die Casting Alloys Market Size Overview by Type (2021-2032)
  15. 1.4.2 Global Aluminum Die Casting Alloys Historic Market Size Review by Type (2021-2026)
  16. 1.4.3 Global Aluminum Die Casting Alloys Forecasted Market Size by Type (2027-2032)
  17. 1.5 Key Regions Market Size by Type
  18. 1.5.1 North America Aluminum Die Casting Alloys Sales Breakdown by Type (2021-2026)
  19. 1.5.2 Europe Aluminum Die Casting Alloys Sales Breakdown by Type (2021-2026)
  20. 1.5.3 Asia-Pacific Aluminum Die Casting Alloys Sales Breakdown by Type (2021-2026)
  21. 1.5.4 South America Aluminum Die Casting Alloys Sales Breakdown by Type (2021-2026)
  22. 1.5.5 Middle East and Africa Aluminum Die Casting Alloys Sales Breakdown by Type (2021-2026)
2 Global Market Dynamics
  1. 2.1 Aluminum Die Casting Alloys Industry Trends
  2. 2.2 Aluminum Die Casting Alloys Industry Drivers
  3. 2.3 Aluminum Die Casting Alloys Industry Opportunities and Challenges
  4. 2.4 Aluminum Die Casting Alloys Industry Restraints
3 Market Competitive Landscape by Company
  1. 3.1 Global Top Players by Aluminum Die Casting Alloys Revenue (2021-2026)
  2. 3.2 Global Top Players by Aluminum Die Casting Alloys Sales (2021-2026)
  3. 3.3 Global Top Players by Aluminum Die Casting Alloys Price (2021-2026)
  4. 3.4 Global Aluminum Die Casting Alloys Industry Company Ranking, 2024 VS 2025 VS 2026
  5. 3.5 Global Aluminum Die Casting Alloys Major Company Production Sites & Headquarters
  6. 3.6 Global Aluminum Die Casting Alloys Company, Product Type & Application
  7. 3.7 Global Aluminum Die Casting Alloys Company Establishment Date
  8. 3.8 Market Competitive Analysis
  9. 3.8.1 Global Aluminum Die Casting Alloys Market CR5 and HHI
  10. 3.8.2 Global Top 5 and 10 Aluminum Die Casting Alloys Players Market Share by Revenue in 2025
  11. 3.8.3 2025 Aluminum Die Casting Alloys Tier 1, Tier 2, and Tier 3
4 Aluminum Die Casting Alloys Regional Status and Outlook
  1. 4.1 Global Aluminum Die Casting Alloys Market Size and CAGR by Region: 2021 VS 2025 VS 2032
  2. 4.2 Global Aluminum Die Casting Alloys Historic Market Size by Region
  3. 4.2.1 Global Aluminum Die Casting Alloys Sales in Volume by Region (2021-2026)
  4. 4.2.2 Global Aluminum Die Casting Alloys Sales in Value by Region (2021-2026)
  5. 4.2.3 Global Aluminum Die Casting Alloys Sales (Volume & Value), Price and Gross Margin (2021-2026)
  6. 4.3 Global Aluminum Die Casting Alloys Forecasted Market Size by Region
  7. 4.3.1 Global Aluminum Die Casting Alloys Sales in Volume by Region (2027-2032)
  8. 4.3.2 Global Aluminum Die Casting Alloys Sales in Value by Region (2027-2032)
  9. 4.3.3 Global Aluminum Die Casting Alloys Sales (Volume & Value), Price and Gross Margin (2027-2032)
5 Aluminum Die Casting Alloys by Application
  1. 5.1 Aluminum Die Casting Alloys Market by Application
  2. 5.1.1 Automotive
  3. 5.1.2 Telecommunications
  4. 5.1.3 Home Appliances
  5. 5.1.4 Medical Equipment
  6. 5.1.5 Power Tools
  7. 5.1.6 Others
  8. 5.2 Global Aluminum Die Casting Alloys Market Size by Application
  9. 5.2.1 Global Aluminum Die Casting Alloys Market Size Overview by Application (2021-2032)
  10. 5.2.2 Global Aluminum Die Casting Alloys Historic Market Size Review by Application (2021-2026)
  11. 5.2.3 Global Aluminum Die Casting Alloys Forecasted Market Size by Application (2027-2032)
  12. 5.3 Key Regions Market Size by Application
  13. 5.3.1 North America Aluminum Die Casting Alloys Sales Breakdown by Application (2021-2026)
  14. 5.3.2 Europe Aluminum Die Casting Alloys Sales Breakdown by Application (2021-2026)
  15. 5.3.3 Asia-Pacific Aluminum Die Casting Alloys Sales Breakdown by Application (2021-2026)
  16. 5.3.4 South America Aluminum Die Casting Alloys Sales Breakdown by Application (2021-2026)
  17. 5.3.5 Middle East and Africa Aluminum Die Casting Alloys Sales Breakdown by Application (2021-2026)
6 Company Profiles
  1. 6.1 Nemak
  2. 6.1.1 Nemak Company Information
  3. 6.1.2 Nemak Business Overview
  4. 6.1.3 Nemak Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  5. 6.1.4 Nemak Aluminum Die Casting Alloys Product Portfolio
  6. 6.1.5 Nemak Recent Developments
  7. 6.2 Xusheng
  8. 6.2.1 Xusheng Company Information
  9. 6.2.2 Xusheng Business Overview
  10. 6.2.3 Xusheng Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  11. 6.2.4 Xusheng Aluminum Die Casting Alloys Product Portfolio
  12. 6.2.5 Xusheng Recent Developments
  13. 6.3 Ryobi
  14. 6.3.1 Ryobi Company Information
  15. 6.3.2 Ryobi Business Overview
  16. 6.3.3 Ryobi Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  17. 6.3.4 Ryobi Aluminum Die Casting Alloys Product Portfolio
  18. 6.3.5 Ryobi Recent Developments
  19. 6.4 Ahresty
  20. 6.4.1 Ahresty Company Information
  21. 6.4.2 Ahresty Business Overview
  22. 6.4.3 Ahresty Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  23. 6.4.4 Ahresty Aluminum Die Casting Alloys Product Portfolio
  24. 6.4.5 Ahresty Recent Developments
  25. 6.5 DGS
  26. 6.5.1 DGS Company Information
  27. 6.5.2 DGS Business Overview
  28. 6.5.3 DGS Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  29. 6.5.4 DGS Aluminum Die Casting Alloys Product Portfolio
  30. 6.5.5 DGS Recent Developments
  31. 6.6 IKD
  32. 6.6.1 IKD Company Information
  33. 6.6.2 IKD Business Overview
  34. 6.6.3 IKD Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  35. 6.6.4 IKD Aluminum Die Casting Alloys Product Portfolio
  36. 6.6.5 IKD Recent Developments
  37. 6.7 Guangdong Wencan
  38. 6.7.1 Guangdong Wencan Company Information
  39. 6.7.2 Guangdong Wencan Business Overview
  40. 6.7.3 Guangdong Wencan Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  41. 6.7.4 Guangdong Wencan Aluminum Die Casting Alloys Product Portfolio
  42. 6.7.5 Guangdong Wencan Recent Developments
  43. 6.8 Georg Fischer
  44. 6.8.1 Georg Fischer Company Information
  45. 6.8.2 Georg Fischer Business Overview
  46. 6.8.3 Georg Fischer Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  47. 6.8.4 Georg Fischer Aluminum Die Casting Alloys Product Portfolio
  48. 6.8.5 Georg Fischer Recent Developments
  49. 6.9 Jiangsu Rongtai
  50. 6.9.1 Jiangsu Rongtai Company Information
  51. 6.9.2 Jiangsu Rongtai Business Overview
  52. 6.9.3 Jiangsu Rongtai Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  53. 6.9.4 Jiangsu Rongtai Aluminum Die Casting Alloys Product Portfolio
  54. 6.9.5 Jiangsu Rongtai Recent Developments
  55. 6.10 Martinrea
  56. 6.10.1 Martinrea Company Information
  57. 6.10.2 Martinrea Business Overview
  58. 6.10.3 Martinrea Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  59. 6.10.4 Martinrea Aluminum Die Casting Alloys Product Portfolio
  60. 6.10.5 Martinrea Recent Developments
  61. 6.11 Teksid
  62. 6.11.1 Teksid Company Information
  63. 6.11.2 Teksid Business Overview
  64. 6.11.3 Teksid Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  65. 6.11.4 Teksid Aluminum Die Casting Alloys Product Portfolio
  66. 6.11.5 Teksid Recent Developments
  67. 6.12 Guangdong Hongtu
  68. 6.12.1 Guangdong Hongtu Company Information
  69. 6.12.2 Guangdong Hongtu Business Overview
  70. 6.12.3 Guangdong Hongtu Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  71. 6.12.4 Guangdong Hongtu Aluminum Die Casting Alloys Product Portfolio
  72. 6.12.5 Guangdong Hongtu Recent Developments
  73. 6.13 Millison Technologies
  74. 6.13.1 Millison Technologies Company Information
  75. 6.13.2 Millison Technologies Business Overview
  76. 6.13.3 Millison Technologies Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  77. 6.13.4 Millison Technologies Aluminum Die Casting Alloys Product Portfolio
  78. 6.13.5 Millison Technologies Recent Developments
  79. 6.14 Handtmann
  80. 6.14.1 Handtmann Company Information
  81. 6.14.2 Handtmann Business Overview
  82. 6.14.3 Handtmann Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  83. 6.14.4 Handtmann Aluminum Die Casting Alloys Product Portfolio
  84. 6.14.5 Handtmann Recent Developments
  85. 6.15 Yadelin
  86. 6.15.1 Yadelin Company Information
  87. 6.15.2 Yadelin Business Overview
  88. 6.15.3 Yadelin Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  89. 6.15.4 Yadelin Aluminum Die Casting Alloys Product Portfolio
  90. 6.15.5 Yadelin Recent Developments
  91. 6.16 Aludyne
  92. 6.16.1 Aludyne Company Information
  93. 6.16.2 Aludyne Business Overview
  94. 6.16.3 Aludyne Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  95. 6.16.4 Aludyne Aluminum Die Casting Alloys Product Portfolio
  96. 6.16.5 Aludyne Recent Developments
  97. 6.17 Rockman
  98. 6.17.1 Rockman Company Information
  99. 6.17.2 Rockman Business Overview
  100. 6.17.3 Rockman Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  101. 6.17.4 Rockman Aluminum Die Casting Alloys Product Portfolio
  102. 6.17.5 Rockman Recent Developments
  103. 6.18 MK Tron
  104. 6.18.1 MK Tron Company Information
  105. 6.18.2 MK Tron Business Overview
  106. 6.18.3 MK Tron Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  107. 6.18.4 MK Tron Aluminum Die Casting Alloys Product Portfolio
  108. 6.18.5 MK Tron Recent Developments
  109. 6.19 Form Technologies
  110. 6.19.1 Form Technologies Company Information
  111. 6.19.2 Form Technologies Business Overview
  112. 6.19.3 Form Technologies Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  113. 6.19.4 Form Technologies Aluminum Die Casting Alloys Product Portfolio
  114. 6.19.5 Form Technologies Recent Developments
  115. 6.20 Sandhar
  116. 6.20.1 Sandhar Company Information
  117. 6.20.2 Sandhar Business Overview
  118. 6.20.3 Sandhar Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  119. 6.20.4 Sandhar Aluminum Die Casting Alloys Product Portfolio
  120. 6.20.5 Sandhar Recent Developments
  121. 6.21 LTH Castings
  122. 6.21.1 LTH Castings Company Information
  123. 6.21.2 LTH Castings Business Overview
  124. 6.21.3 LTH Castings Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  125. 6.21.4 LTH Castings Aluminum Die Casting Alloys Product Portfolio
  126. 6.21.5 LTH Castings Recent Developments
  127. 6.22 Endurance
  128. 6.22.1 Endurance Company Information
  129. 6.22.2 Endurance Business Overview
  130. 6.22.3 Endurance Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  131. 6.22.4 Endurance Aluminum Die Casting Alloys Product Portfolio
  132. 6.22.5 Endurance Recent Developments
  133. 6.23 Eontec
  134. 6.23.1 Eontec Company Information
  135. 6.23.2 Eontec Business Overview
  136. 6.23.3 Eontec Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  137. 6.23.4 Eontec Aluminum Die Casting Alloys Product Portfolio
  138. 6.23.5 Eontec Recent Developments
  139. 6.24 Tatfook Technology
  140. 6.24.1 Tatfook Technology Company Information
  141. 6.24.2 Tatfook Technology Business Overview
  142. 6.24.3 Tatfook Technology Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  143. 6.24.4 Tatfook Technology Aluminum Die Casting Alloys Product Portfolio
  144. 6.24.5 Tatfook Technology Recent Developments
  145. 6.25 Foryou Corporation
  146. 6.25.1 Foryou Corporation Company Information
  147. 6.25.2 Foryou Corporation Business Overview
  148. 6.25.3 Foryou Corporation Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  149. 6.25.4 Foryou Corporation Aluminum Die Casting Alloys Product Portfolio
  150. 6.25.5 Foryou Corporation Recent Developments
  151. 6.26 Gibbs
  152. 6.26.1 Gibbs Company Information
  153. 6.26.2 Gibbs Business Overview
  154. 6.26.3 Gibbs Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  155. 6.26.4 Gibbs Aluminum Die Casting Alloys Product Portfolio
  156. 6.26.5 Gibbs Recent Developments
  157. 6.27 Nanjing Chervon
  158. 6.27.1 Nanjing Chervon Company Information
  159. 6.27.2 Nanjing Chervon Business Overview
  160. 6.27.3 Nanjing Chervon Aluminum Die Casting Alloys Sales, Revenue and Gross Margin (2021-2026)
  161. 6.27.4 Nanjing Chervon Aluminum Die Casting Alloys Product Portfolio
  162. 6.27.5 Nanjing Chervon Recent Developments
7 North America by Country
  1. 7.1 North America Aluminum Die Casting Alloys Sales by Country
  2. 7.1.1 North America Aluminum Die Casting Alloys Sales Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  3. 7.1.2 North America Aluminum Die Casting Alloys Sales by Country (2021-2026)
  4. 7.1.3 North America Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032)
  5. 7.2 North America Aluminum Die Casting Alloys Market Size by Country
  6. 7.2.1 North America Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  7. 7.2.2 North America Aluminum Die Casting Alloys Market Size by Country (2021-2026)
  8. 7.2.3 North America Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032)
8 Europe by Country
  1. 8.1 Europe Aluminum Die Casting Alloys Sales by Country
  2. 8.1.1 Europe Aluminum Die Casting Alloys Sales Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  3. 8.1.2 Europe Aluminum Die Casting Alloys Sales by Country (2021-2026)
  4. 8.1.3 Europe Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032)
  5. 8.2 Europe Aluminum Die Casting Alloys Market Size by Country
  6. 8.2.1 Europe Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  7. 8.2.2 Europe Aluminum Die Casting Alloys Market Size by Country (2021-2026)
  8. 8.2.3 Europe Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032)
9 Asia-Pacific by Country
  1. 9.1 Asia-Pacific Aluminum Die Casting Alloys Sales by Country
  2. 9.1.1 Asia-Pacific Aluminum Die Casting Alloys Sales Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  3. 9.1.2 Asia-Pacific Aluminum Die Casting Alloys Sales by Country (2021-2026)
  4. 9.1.3 Asia-Pacific Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032)
  5. 9.2 Asia-Pacific Aluminum Die Casting Alloys Market Size by Country
  6. 9.2.1 Asia-Pacific Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  7. 9.2.2 Asia-Pacific Aluminum Die Casting Alloys Market Size by Country (2021-2026)
  8. 9.2.3 Asia-Pacific Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032)
10 South America by Country
  1. 10.1 South America Aluminum Die Casting Alloys Sales by Country
  2. 10.1.1 South America Aluminum Die Casting Alloys Sales Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  3. 10.1.2 South America Aluminum Die Casting Alloys Sales by Country (2021-2026)
  4. 10.1.3 South America Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032)
  5. 10.2 South America Aluminum Die Casting Alloys Market Size by Country
  6. 10.2.1 South America Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  7. 10.2.2 South America Aluminum Die Casting Alloys Market Size by Country (2021-2026)
  8. 10.2.3 South America Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032)
11 Middle East and Africa by Country
  1. 11.1 Middle East and Africa Aluminum Die Casting Alloys Sales by Country
  2. 11.1.1 Middle East and Africa Aluminum Die Casting Alloys Sales Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  3. 11.1.2 Middle East and Africa Aluminum Die Casting Alloys Sales by Country (2021-2026)
  4. 11.1.3 Middle East and Africa Aluminum Die Casting Alloys Sales Forecast by Country (2027-2032)
  5. 11.2 Middle East and Africa Aluminum Die Casting Alloys Market Size by Country
  6. 11.2.1 Middle East and Africa Aluminum Die Casting Alloys Market Size Growth Rate (CAGR) by Country: 2021 VS 2025 VS 2032
  7. 11.2.2 Middle East and Africa Aluminum Die Casting Alloys Market Size by Country (2021-2026)
  8. 11.2.3 Middle East and Africa Aluminum Die Casting Alloys Market Size Forecast by Country (2027-2032)
12 Value Chain and Sales Channels Analysis
  1. 12.1 Aluminum Die Casting Alloys Value Chain Analysis
  2. 12.1.1 Aluminum Die Casting Alloys Key Raw Materials
  3. 12.1.2 Key Raw Materials Price
  4. 12.1.3 Raw Materials Key Suppliers
  5. 12.1.4 Manufacturing Cost Structure
  6. 12.1.5 Aluminum Die Casting Alloys Production Mode & Process
  7. 12.2 Aluminum Die Casting Alloys Sales Channels Analysis
  8. 12.2.1 Direct Comparison with Distribution Share
  9. 12.2.2 Aluminum Die Casting Alloys Distributors
  10. 12.2.3 Aluminum Die Casting Alloys Customers
13 Concluding Insights
    14 Appendix
    1. 14.1 Reasons for Doing This Study
    2. 14.2 Research Methodology
    3. 14.3 Research Process
    4. 14.4 Authors List of This Report
    5. 14.5 Data Source
    6. 14.5.1 Secondary Sources
    7. 14.5.2 Primary Sources
    8. 14.6 Disclaimer

    GET THE RESEARCH

    Choose your license.

    Choose who needs access.
    All options are for this report and research series.

    Compare access permissions.

    Single User License
    One named user. Individual access.
    Multi User License
    Up to 5 users in the same department.
    Enterprise License
    Organization-wide access within the agreed license.

    Access applies to the purchased edition. Later editions are separate purchases.

    License options
    $3,450USD
    Buy now

    PDF by email within 3–5 working days after payment confirmation.

    Talk to an analyst
    APO Research
    Talk to an analyst