APO Research, Inc.
Talk to an analyst

APO RESEARCH · REPORT

Aluminum Die Casting Alloys

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Explore the product
View pricing & licenses

Product & engineering

Understand the product.

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Silicon lowers liquidus temperature and increases fluidity while reducing hot-tearing susceptibility; typical contents range from approximately 7–12% for general-purpose castings to ~17–19% for abrasion-resistant applications. Copper additions raise strength and hardness via Al–Cu intermetallics with a corresponding reduction in ductility and corrosion tolerance. Magnesium supports age-hardening responses and, in vacuum-assisted or squeeze-cast conditions, enables heat-treatable structural performance. Iron, prevalent in recycled streams, is held within narrow limits to manage die soldering; manganese modifies Fe-bearing phases from plate-like β-Fe to less deleterious α-Fe morphologies. Nickel appears in elevated-temperature grades for strength retention and creep resistance. Grain refiners (Ti–B) and eutectic modifiers (Sr) adjust nucleation density and silicon morphology under the high cooling rates typical of die casting.

Process conditions influence alloy identity as directly as nominal composition. High-pressure die casting employs high gate velocities and intensification pressures that can entrain oxide films and gas; alloy windows and melt practice therefore converge on oxide-film toughness, wetting behavior, and freezing ranges compatible with thin-wall solidification. Low-pressure and squeeze casting operate at lower turbulence and accommodate thicker sections with reduced porosity. Vacuum-assisted HPDC and semi-solid routes reduce entrainment levels to thresholds that permit T5/T6 heat treatments, extending aluminum die casting alloys into large body-structure and e-powertrain domains.

Mechanical and physical properties arise from composition, section thickness, porosity, and cooling rate. As-cast Al–Si–Cu grades commonly exhibit ultimate tensile strength on the order of 250–330 MPa, yield strength around 120–180 MPa, and elongation approximately 1–5% in thin sections. Al–Si–Mg grades emphasize ductility and corrosion performance with lower copper contents. Very high-silicon alloys provide elevated hardness and wear resistance with limited elongation. Thermal conductivity typically lies near 80–130 W·m⁻¹·K⁻¹, the coefficient of thermal expansion near 21–24 μm·m⁻¹·K⁻¹, and density near 2.70–2.75 g·cm⁻³. At elevated temperatures, strength retention correlates with the stability of Cu-, Mg-, and Ni-bearing intermetallics and the porosity state established during casting.

Higher copper contents correlate with reduced chloride-environment tolerance relative to low-Cu Al–Si–Mg systems. The high silicon fraction and as-cast skin porosity of HPDC tend to produce gray, matte anodic finishes; impregnation, conversion coatings, e-coat, and powder coatings are widely used to stabilize appearance and seal leak paths. Weldability varies with gas content and oxide integrity in the casting skin and improves under vacuum-assisted practices.

Quality assurance in production employs compositional control (Fe/Mn balance, Zn, alkalis, Pb/Sn), melt cleanliness (degassing and fluxing to limit hydrogen and inclusions), and die thermal management to regulate fill and solidification gradients. Runner and overflow design, lubricant control, and vacuum systems govern porosity and soldering tendencies. Verification commonly uses tensile specimens from coupons or in-situ cast features, pressure-tightness tests for fluid-handling components, radiography or CT for internal integrity, and dimensional metrology to monitor die wear and thermal distortion.

In use, balanced Al–Si–Cu compositions are prevalent in housings, brackets, and appliance components; higher-silicon alloys appear frequently in thin-wall electronics enclosures and heat-dissipation parts; low-Cu Al–Si–Mg systems populate fluid manifolds and corrosion-sensitive environments; Ni-containing Al–Si–Cu–Ni grades occupy elevated-temperature zones in driveline and engine-adjacent service; vacuum-cast, heat-treatable Al–Si–Mg–Mn variants are established in structural body nodes and large e-powertrain enclosures.

Material sourcing in this sector relies heavily on secondary aluminum. Recycling loops introduce variability in Fe and minor elements, and industrial practice stabilizes these through dilution and targeted additions to maintain die life, surface quality, and mechanical consistency. In industrial terms, the “alloy” is defined jointly by nominal composition and the process-dependent microstructure and defect population produced under die-casting conditions.

Selected research

Market Structure

Global Aluminum Die Casting Alloys Market by Size, by Type, by Application, by Region, History and Forecast 2021-2032

Report ID 173221500328 December 2025193 pages

Choose your research edition.

Industry ResearchAluminum Die Casting Alloys Industry Research Report 2026142 pages · $2,950 USDIndustry Growth & TrendsGlobal Aluminum Die Casting Alloys Industry Growth and Trends Forecast to 2032127 pages · $3,450 USDMarket StructureGlobal Aluminum Die Casting Alloys Market by Size, by Type, by Application, by Region, History and Forecast 2021-2032193 pages · $3,950 USDMarket Outlook & Growth OpportunitiesGlobal Aluminum Die Casting Alloys Market Outlook and Growth Opportunities 2026211 pages · $4,250 USDMarket Analysis & ForecastGlobal Aluminum Die Casting Alloys Market Analysis and Forecast 2026-2032214 pages · $4,950 USD

Market perspective

Aluminum die casting alloys are aluminum-based foundry compositions configured for high-pressure and low-pressure die casting. They are characterized by silicon-rich chemistries that promote rapid, stable filling of thin, complex cavities and the formation of a fine Al–Si eutectic microstructure with controlled intermetallic phases. The class spans Al–Si–Cu, Al–Si–Mg, Al–Si–Cu–Ni, and very high-silicon wear-resistant variants, mapped globally to A3xx/A4xx series, EN AC-46xxx/47xxx, and JIS ADC grades.

Silicon lowers liquidus temperature and increases fluidity while reducing hot-tearing susceptibility; typical contents range from approximately 7–12% for general-purpose castings to ~17–19% for abrasion-resistant applications. Copper additions raise strength and hardness via Al–Cu intermetallics with a corresponding reduction in ductility and corrosion tolerance. Magnesium supports age-hardening responses and, in vacuum-assisted or squeeze-cast conditions, enables heat-treatable structural performance. Iron, prevalent in recycled streams, is held within narrow limits to manage die soldering; manganese modifies Fe-bearing phases from plate-like β-Fe to less deleterious α-Fe morphologies. Nickel appears in elevated-temperature grades for strength retention and creep resistance. Grain refiners (Ti–B) and eutectic modifiers (Sr) adjust nucleation density and silicon morphology under the high cooling rates typical of die casting.

Process conditions influence alloy identity as directly as nominal composition. High-pressure die casting employs high gate velocities and intensification pressures that can entrain oxide films and gas; alloy windows and melt practice therefore converge on oxide-film toughness, wetting behavior, and freezing ranges compatible with thin-wall solidification. Low-pressure and squeeze casting operate at lower turbulence and accommodate thicker sections with reduced porosity. Vacuum-assisted HPDC and semi-solid routes reduce entrainment levels to thresholds that permit T5/T6 heat treatments, extending aluminum die casting alloys into large body-structure and e-powertrain domains.

Read the full market overview

Mechanical and physical properties arise from composition, section thickness, porosity, and cooling rate. As-cast Al–Si–Cu grades commonly exhibit ultimate tensile strength on the order of 250–330 MPa, yield strength around 120–180 MPa, and elongation approximately 1–5% in thin sections. Al–Si–Mg grades emphasize ductility and corrosion performance with lower copper contents. Very high-silicon alloys provide elevated hardness and wear resistance with limited elongation. Thermal conductivity typically lies near 80–130 W·m⁻¹·K⁻¹, the coefficient of thermal expansion near 21–24 μm·m⁻¹·K⁻¹, and density near 2.70–2.75 g·cm⁻³. At elevated temperatures, strength retention correlates with the stability of Cu-, Mg-, and Ni-bearing intermetallics and the porosity state established during casting.

Higher copper contents correlate with reduced chloride-environment tolerance relative to low-Cu Al–Si–Mg systems. The high silicon fraction and as-cast skin porosity of HPDC tend to produce gray, matte anodic finishes; impregnation, conversion coatings, e-coat, and powder coatings are widely used to stabilize appearance and seal leak paths. Weldability varies with gas content and oxide integrity in the casting skin and improves under vacuum-assisted practices.

Quality assurance in production employs compositional control (Fe/Mn balance, Zn, alkalis, Pb/Sn), melt cleanliness (degassing and fluxing to limit hydrogen and inclusions), and die thermal management to regulate fill and solidification gradients. Runner and overflow design, lubricant control, and vacuum systems govern porosity and soldering tendencies. Verification commonly uses tensile specimens from coupons or in-situ cast features, pressure-tightness tests for fluid-handling components, radiography or CT for internal integrity, and dimensional metrology to monitor die wear and thermal distortion.

In use, balanced Al–Si–Cu compositions are prevalent in housings, brackets, and appliance components; higher-silicon alloys appear frequently in thin-wall electronics enclosures and heat-dissipation parts; low-Cu Al–Si–Mg systems populate fluid manifolds and corrosion-sensitive environments; Ni-containing Al–Si–Cu–Ni grades occupy elevated-temperature zones in driveline and engine-adjacent service; vacuum-cast, heat-treatable Al–Si–Mg–Mn variants are established in structural body nodes and large e-powertrain enclosures.

Material sourcing in this sector relies heavily on secondary aluminum. Recycling loops introduce variability in Fe and minor elements, and industrial practice stabilizes these through dilution and targeted additions to maintain die life, surface quality, and mechanical consistency. In industrial terms, the “alloy” is defined jointly by nominal composition and the process-dependent microstructure and defect population produced under die-casting conditions.

The global Aluminum Die Casting Alloys market is projected to grow from US$ million in 2026 to US$ million by 2032, implying a CAGR of % over 2026-2032.

The US & Canada market for Aluminum Die Casting Alloys is projected to increase from US$ million in 2026 to US$ million by 2032, at a CAGR of % over 2026-2032.

The Europe market for Aluminum Die Casting Alloys is projected to increase from US$ million in 2026 to US$ million by 2032, at a CAGR of % over 2026-2032.

The Asia Pacific market for Aluminum Die Casting Alloys is projected to increase from US$ million in 2026 to US$ million by 2032, at a CAGR of % over 2026-2032.

The China market for Aluminum Die Casting Alloys is projected to increase from US$ million in 2026 to US$ million by 2032, at a CAGR of % over 2026-2032.

Leading global manufacturers of Aluminum Die Casting Alloys include Nemak, Xusheng, Ryobi, Ahresty, DGS, IKD, Guangdong Wencan, Georg Fischer and Jiangsu Rongtai, among others. In 2025, the top three vendors together accounted for approximately % of global revenue.

On the production side, the report examines Aluminum Die Casting Alloys output, growth rates, and market shares by manufacturer and by region (at regional and country level) for 2021-2026, with forecasts through 2032.

On the consumption side, the report analyzes sales of Aluminum Die Casting Alloys by region (regional and country level), company, type, and application for 2021-2026 and provides forecasts through 2032.

The report provides an overview of the global Aluminum Die Casting Alloys market in terms of capacity, output, revenue, and price, analyzing global market trends using historical revenue and sales data for 2021-2025, estimates for 2026, and projected CAGRs through 2032.

The study covers key producers of Aluminum Die Casting Alloys and consumption patterns in major regions and countries, assesses future market potential, and highlights priority regions and countries for segmenting the market into sub-sectors, with country-specific market value data for the U.S., Canada, Mexico, Brazil, China, Japan, South Korea, Southeast Asia, India, Germany, the U.K., Italy, the Middle East, Africa, and other countries.

The report also presents Aluminum Die Casting Alloys sales, revenue, market share, and industry ranking for the main manufacturers for 2021-2026, identifies the major stakeholders in the global market, and analyzes their competitive landscape and market positioning based on recent developments and segmental revenues.

In addition, the report analyzes segment data by type and application—covering sales, revenue, and price—for 2021-2032, and evaluates and forecasts the Aluminum Die Casting Alloys market size, projected growth trends, production technologies, key applications, and end-use industries.

Aluminum Die Casting Alloys Segment by Company

Nemak

Xusheng

Ryobi

Ahresty

DGS

IKD

Guangdong Wencan

Georg Fischer

Jiangsu Rongtai

Martinrea

Teksid

Guangdong Hongtu

Millison Technologies

Handtmann

Yadelin

Aludyne

Rockman

MK Tron

Form Technologies

Sandhar

LTH Castings

Endurance

Eontec

Tatfook Technology

Foryou Corporation

Gibbs

Nanjing Chervon

Aluminum Die Casting Alloys Segment by Type

A356

A360

A380

A383

B390

A413

Other

Aluminum Die Casting Alloys Segment by Application

Automotive

Telecommunications

Home Appliances

Medical Equipment

Power Tools

Others

Aluminum Die Casting Alloys Segment by Region

North America

United States

Canada

Mexico

Europe

Germany

France

U.K.

Italy

Russia

Spain

Netherlands

Switzerland

Sweden

Poland

Asia-Pacific

China

Japan

South Korea

India

Australia

Taiwan

Southeast Asia

South America

Brazil

Argentina

Chile

Colombia

Middle East & Africa

Egypt

South Africa

Israel

Türkiye

GCC Countries

Study Objectives

1. To analyze and research the global status and future forecast, involving, production, value, consumption, growth rate (CAGR), market share, historical and forecast.

2. To present the key manufacturers, capacity, production, revenue, market share, and Recent Developments.

3. To split the breakdown data by regions, type, manufacturers, and Application.

4. To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints, and risks.

5. To identify significant trends, drivers, influence factors in global and regions.

6. To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.

Reasons to Buy This Report

1. This report will help the readers to understand the competition within the industries and strategies for the competitive environment to enhance the potential profit. The report also focuses on the competitive landscape of the global Aluminum Die Casting Alloys market, and introduces in detail the market share, industry ranking, competitor ecosystem, market performance, new product development, operation situation, expansion, and acquisition. etc. of the main players, which helps the readers to identify the main competitors and deeply understand the competition pattern of the market.

2. This report will help stakeholders to understand the global industry status and trends of Aluminum Die Casting Alloys and provides them with information on key market drivers, restraints, challenges, and opportunities.

3. This report will help stakeholders to understand competitors better and gain more insights to strengthen their position in their businesses. The competitive landscape section includes the market share and rank (in volume and value), competitor ecosystem, new product development, expansion, and acquisition.

4. This report stays updated with novel technology integration, features, and the latest developments in the market.

5. This report helps stakeholders to gain insights into which regions to target globally.

6. This report helps stakeholders to gain insights into the end-user perception concerning the adoption of Aluminum Die Casting Alloys.

7. This report helps stakeholders to identify some of the key players in the market and understand their valuable contribution.

Chapter Outline

Chapter 1: Provides an overview of the Aluminum Die Casting Alloys market, including product definition, global market growth prospects, production value, capacity, and average price forecasts (2021-2032).

Chapter 2: Analysis key trends, drivers, challenges, and opportunities within the global Aluminum Die Casting Alloys industry.

Chapter 3: Detailed analysis of Aluminum Die Casting Alloys market competition landscape. Including Aluminum Die Casting Alloys manufacturers' output value, output and average price from 2021 to 2026, as well as competition analysis indicators such as origin, product type, application, merger and acquisition information, etc.

Chapter 4: Provides the analysis of various market segments by type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments.

Chapter 5: Provides the analysis of various market segments by application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.

Chapter 6: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product production/output, value, price, gross margin, product introduction, recent development, etc.

Chapter 7: Production/Production Value of Aluminum Die Casting Alloys by region. It provides a quantitative analysis of the market size and development potential of each region in the next six years.

Chapter 8: Consumption of Aluminum Die Casting Alloys in regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space, and production of each country in the world.

Chapter 9: Analysis of industrial chain, including the upstream and downstream of the industry.

Chapter 10: Concluding Insights of the report.

More report detail

Tables and figures
List of Tables Table 1. Aluminum Die Casting Alloys Industry Trends Table 2. Aluminum Die Casting Alloys Industry Drivers Table 3. Aluminum Die Casting Alloys Industry Opportunities and Challenges Table 4. Aluminum Die Casting Alloys Industry Restraints Table 5. Global Aluminum Die Casting Alloys Production Value by Manufacturers (US$ Million) & (2021-2026) Table 6. Global Aluminum Die Casting Alloys Production Value Share by Manufacturers (2021-2026) Table 7. Global Aluminum Die Casting Alloys Production by Manufacturers (t) & (2021-2026) Table 8. Global Aluminum Die Casting Alloys Production Market Share by Manufacturers Table 9. Global Aluminum Die Casting Alloys Average Price (USD/t) of Manufacturers (2021-2026) Table 10. Global Aluminum Die Casting Alloys Industry Manufacturers Ranking, 2024 VS 2025 VS 2026 Table 11. Global Aluminum Die Casting Alloys Key Manufacturers Manufacturing Sites & Headquarters Table 12. Global Aluminum Die Casting Alloys Manufacturers, Product Type & Application Table 13. Global Aluminum Die Casting Alloys Manufacturers Established Date Table 14. Global Manufacturers Market Concentration Ratio (CR5 and HHI) Table 15. Global Aluminum Die Casting Alloys by Manufacturers Type (Tier 1, Tier 2, and Tier 3) & (based on the Production Value of 2025) Table 16. Major Manufacturers of A356 Table 17. Major Manufacturers of A360 Table 18. Major Manufacturers of A380 Table 19. Major Manufacturers of A383 Table 20. Major Manufacturers of B390 Table 21. Major Manufacturers of A413 Table 22. Major Manufacturers of Other Table 23. Global Aluminum Die Casting Alloys Production by Type 2021 VS 2025 VS 2032 (t) Table 24. Global Aluminum Die Casting Alloys Production by Type (2021-2026) & (t) Table 25. Global Aluminum Die Casting Alloys Production by Type (2027-2032) & (t) Table 26. Global Aluminum Die Casting Alloys Production Market Share by Type (2021-2026) Table 27. Global Aluminum Die Casting Alloys Production Market Share by Type (2027-2032) Table 28. Global Aluminum Die Casting Alloys Production Value by Type 2021 VS 2025 VS 2032 (t) Table 29. Global Aluminum Die Casting Alloys Production Value by Type (2021-2026) & (t) Table 30. Global Aluminum Die Casting Alloys Production Value by Type (2027-2032) & (t) Table 31. Global Aluminum Die Casting Alloys Production Value Market Share by Type (2021-2026) Table 32. Global Aluminum Die Casting Alloys Production Value Market Share by Type (2027-2032) Table 33. Major Manufacturers of Automotive Table 34. Major Manufacturers of Telecommunications Table 35. Major Manufacturers of Home Appliances Table 36. Major Manufacturers of Medical Equipment Table 37. Major Manufacturers of Power Tools Table 38. Major Manufacturers of Others Table 39. Global Aluminum Die Casting Alloys Production by Application 2021 VS 2025 VS 2032 (t) Table 40. Global Aluminum Die Casting Alloys Production by Application (2021-2026) & (t) Table 41. Global Aluminum Die Casting Alloys Production by Application (2027-2032) & (t) Table 42. Global Aluminum Die Casting Alloys Production Market Share by Application (2021-2026) Table 43. Global Aluminum Die Casting Alloys Production Market Share by Application (2027-2032) Table 44. Global Aluminum Die Casting Alloys Production Value by Application 2021 VS 2025 VS 2032 (t) Table 45. Global Aluminum Die Casting Alloys Production Value by Application (2021-2026) & (t) Table 46. Global Aluminum Die Casting Alloys Production Value by Application (2027-2032) & (t) Table 47. Global Aluminum Die Casting Alloys Production Value Market Share by Application (2021-2026) Table 48. Global Aluminum Die Casting Alloys Production Value Market Share by Application (2027-2032) Table 49. Nemak Company Information Table 50. Nemak Business Overview Table 51. Nemak Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 52. Nemak Aluminum Die Casting Alloys Product Portfolio Table 53. Nemak Recent Development Table 54. Xusheng Company Information Table 55. Xusheng Business Overview Table 56. Xusheng Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 57. Xusheng Aluminum Die Casting Alloys Product Portfolio Table 58. Xusheng Recent Development Table 59. Ryobi Company Information Table 60. Ryobi Business Overview Table 61. Ryobi Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 62. Ryobi Aluminum Die Casting Alloys Product Portfolio Table 63. Ryobi Recent Development Table 64. Ahresty Company Information Table 65. Ahresty Business Overview Table 66. Ahresty Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 67. Ahresty Aluminum Die Casting Alloys Product Portfolio Table 68. Ahresty Recent Development Table 69. DGS Company Information Table 70. DGS Business Overview Table 71. DGS Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 72. DGS Aluminum Die Casting Alloys Product Portfolio Table 73. DGS Recent Development Table 74. IKD Company Information Table 75. IKD Business Overview Table 76. IKD Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 77. IKD Aluminum Die Casting Alloys Product Portfolio Table 78. IKD Recent Development Table 79. Guangdong Wencan Company Information Table 80. Guangdong Wencan Business Overview Table 81. Guangdong Wencan Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 82. Guangdong Wencan Aluminum Die Casting Alloys Product Portfolio Table 83. Guangdong Wencan Recent Development Table 84. Georg Fischer Company Information Table 85. Georg Fischer Business Overview Table 86. Georg Fischer Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 87. Georg Fischer Aluminum Die Casting Alloys Product Portfolio Table 88. Georg Fischer Recent Development Table 89. Jiangsu Rongtai Company Information Table 90. Jiangsu Rongtai Business Overview Table 91. Jiangsu Rongtai Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 92. Jiangsu Rongtai Aluminum Die Casting Alloys Product Portfolio Table 93. Jiangsu Rongtai Recent Development Table 94. Martinrea Company Information Table 95. Martinrea Business Overview Table 96. Martinrea Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 97. Martinrea Aluminum Die Casting Alloys Product Portfolio Table 98. Martinrea Recent Development Table 99. Teksid Company Information Table 100. Teksid Business Overview Table 101. Teksid Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 102. Teksid Aluminum Die Casting Alloys Product Portfolio Table 103. Teksid Recent Development Table 104. Guangdong Hongtu Company Information Table 105. Guangdong Hongtu Business Overview Table 106. Guangdong Hongtu Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 107. Guangdong Hongtu Aluminum Die Casting Alloys Product Portfolio Table 108. Guangdong Hongtu Recent Development Table 109. Millison Technologies Company Information Table 110. Millison Technologies Business Overview Table 111. Millison Technologies Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 112. Millison Technologies Aluminum Die Casting Alloys Product Portfolio Table 113. Millison Technologies Recent Development Table 114. Handtmann Company Information Table 115. Handtmann Business Overview Table 116. Handtmann Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 117. Handtmann Aluminum Die Casting Alloys Product Portfolio Table 118. Handtmann Recent Development Table 119. Yadelin Company Information Table 120. Yadelin Business Overview Table 121. Yadelin Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 122. Yadelin Aluminum Die Casting Alloys Product Portfolio Table 123. Yadelin Recent Development Table 124. Aludyne Company Information Table 125. Aludyne Business Overview Table 126. Aludyne Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 127. Aludyne Aluminum Die Casting Alloys Product Portfolio Table 128. Aludyne Recent Development Table 129. Rockman Company Information Table 130. Rockman Business Overview Table 131. Rockman Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 132. Rockman Aluminum Die Casting Alloys Product Portfolio Table 133. Rockman Recent Development Table 134. MK Tron Company Information Table 135. MK Tron Business Overview Table 136. MK Tron Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 137. MK Tron Aluminum Die Casting Alloys Product Portfolio Table 138. MK Tron Recent Development Table 139. Form Technologies Company Information Table 140. Form Technologies Business Overview Table 141. Form Technologies Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 142. Form Technologies Aluminum Die Casting Alloys Product Portfolio Table 143. Form Technologies Recent Development Table 144. Sandhar Company Information Table 145. Sandhar Business Overview Table 146. Sandhar Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 147. Sandhar Aluminum Die Casting Alloys Product Portfolio Table 148. Sandhar Recent Development Table 149. LTH Castings Company Information Table 150. LTH Castings Business Overview Table 151. LTH Castings Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 152. LTH Castings Aluminum Die Casting Alloys Product Portfolio Table 153. LTH Castings Recent Development Table 154. Endurance Company Information Table 155. Endurance Business Overview Table 156. Endurance Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 157. Endurance Aluminum Die Casting Alloys Product Portfolio Table 158. Endurance Recent Development Table 159. Eontec Company Information Table 160. Eontec Business Overview Table 161. Eontec Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 162. Eontec Aluminum Die Casting Alloys Product Portfolio Table 163. Eontec Recent Development Table 164. Tatfook Technology Company Information Table 165. Tatfook Technology Business Overview Table 166. Tatfook Technology Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 167. Tatfook Technology Aluminum Die Casting Alloys Product Portfolio Table 168. Tatfook Technology Recent Development Table 169. Foryou Corporation Company Information Table 170. Foryou Corporation Business Overview Table 171. Foryou Corporation Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 172. Foryou Corporation Aluminum Die Casting Alloys Product Portfolio Table 173. Foryou Corporation Recent Development Table 174. Gibbs Company Information Table 175. Gibbs Business Overview Table 176. Gibbs Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 177. Gibbs Aluminum Die Casting Alloys Product Portfolio Table 178. Gibbs Recent Development Table 179. Nanjing Chervon Company Information Table 180. Nanjing Chervon Business Overview Table 181. Nanjing Chervon Aluminum Die Casting Alloys Production (t), Value (US$ Million), Price (USD/t) and Gross Margin (2021-2026) Table 182. Nanjing Chervon Aluminum Die Casting Alloys Product Portfolio Table 183. Nanjing Chervon Recent Development Table 184. Global Aluminum Die Casting Alloys Production by Region: 2021 VS 2025 VS 2032 (t) Table 185. Global Aluminum Die Casting Alloys Production by Region (2021-2026) & (t) Table 186. Global Aluminum Die Casting Alloys Production Market Share by Region (2021-2026) Table 187. Global Aluminum Die Casting Alloys Production Forecast by Region (2027-2032) & (t) Table 188. Global Aluminum Die Casting Alloys Production Market Share Forecast by Region (2027-2032) Table 189. Global Aluminum Die Casting Alloys Production Value Comparison by Region: 2021 VS 2025 VS 2032 (US$ Million) Table 190. Global Aluminum Die Casting Alloys Production Value by Region (2021-2026) & (US$ Million) Table 191. Global Aluminum Die Casting Alloys Production Value Share by Region (2021-2026) Table 192. Global Aluminum Die Casting Alloys Production Value by Region (2027-2032) & (US$ Million) Table 193. Global Aluminum Die Casting Alloys Production Value Share by Region: (2027-2032) & (US$ Million) Table 194. Global Aluminum Die Casting Alloys Market Average Price (USD/t) by Region (2021-2026) Table 195. Global Aluminum Die Casting Alloys Market Average Price (USD/t) by Region (2027-2032) Table 196. Global Aluminum Die Casting Alloys Consumption by Region: 2021 VS 2025 VS 2032 (t) Table 197. Global Aluminum Die Casting Alloys Consumption by Region (2021-2026) & (t) Table 198. Global Aluminum Die Casting Alloys Consumption Market Share by Region (2021-2026) Table 199. Global Aluminum Die Casting Alloys Consumption Forecasted by Region (2027-2032) & (t) Table 200. Global Aluminum Die Casting Alloys Consumption Forecasted Market Share by Region (2027-2032) Table 201. North America Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 202. North America Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 203. North America Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 204. Europe Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 205. Europe Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 206. Europe Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 207. Asia Pacific Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 208. Asia Pacific Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 209. Asia Pacific Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 210. South America Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 211. South America Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 212. South America Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 213. Middle East & Africa Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032 (t) Table 214. Middle East & Africa Aluminum Die Casting Alloys Consumption by Country (2021-2026) & (t) Table 215. Middle East & Africa Aluminum Die Casting Alloys Consumption by Country (2027-2032) & (t) Table 216. Key Raw Materials Table 217. Raw Materials Key Suppliers Table 218. Aluminum Die Casting Alloys Distributors List Table 219. Aluminum Die Casting Alloys Customers List Table 220. Research Programs/Design for This Report Table 221. Authors List of This Report Table 222. Secondary Sources Table 223. Primary Sources List of Figures Figure 1. Aluminum Die Casting Alloys Product Image Figure 2. Global Aluminum Die Casting Alloys Production Value (US$ Million), 2021 VS 2025 VS 2032 Figure 3. Global Aluminum Die Casting Alloys Production Value (2021-2032) & (US$ Million) Figure 4. Global Aluminum Die Casting Alloys Production Capacity (2021-2032) & (t) Figure 5. Global Aluminum Die Casting Alloys Production (2021-2032) & (t) Figure 6. Global Aluminum Die Casting Alloys Average Price (USD/t) & (2021-2032) Figure 7. Global Top 5 and 10 Aluminum Die Casting Alloys Players Market Share by Production Value in 2025 Figure 8. Manufacturers Type (Tier 1, Tier 2, and Tier 3): 2021 VS 2025 Figure 9. A356 Image Figure 10. A360 Image Figure 11. A380 Image Figure 12. A383 Image Figure 13. B390 Image Figure 14. A413 Image Figure 15. Other Image Figure 16. Global Aluminum Die Casting Alloys Production by Type (2021 VS 2025 VS 2032) & (t) Figure 17. Global Aluminum Die Casting Alloys Production Market Share 2021 VS 2025 VS 2032 Figure 18. Global Aluminum Die Casting Alloys Production Market Share by Type (2021-2032) Figure 19. Global Aluminum Die Casting Alloys Production Value by Type (2021 VS 2025 VS 2032) & (t) Figure 20. Global Aluminum Die Casting Alloys Production Value Share 2021 VS 2025 VS 2032 Figure 21. Global Aluminum Die Casting Alloys Production Value Share by Type (2021-2032) Figure 22. Automotive Image Figure 23. Telecommunications Image Figure 24. Home Appliances Image Figure 25. Medical Equipment Image Figure 26. Power Tools Image Figure 27. Others Image Figure 28. Global Aluminum Die Casting Alloys Production by Application (2021 VS 2025 VS 2032) & (t) Figure 29. Global Aluminum Die Casting Alloys Production Market Share 2021 VS 2025 VS 2032 Figure 30. Global Aluminum Die Casting Alloys Production Market Share by Application (2021-2032) Figure 31. Global Aluminum Die Casting Alloys Production Value by Application (2021 VS 2025 VS 2032) & (t) Figure 32. Global Aluminum Die Casting Alloys Production Value Share 2021 VS 2025 VS 2032 Figure 33. Global Aluminum Die Casting Alloys Production Value Share by Application (2021-2032) Figure 34. Global Aluminum Die Casting Alloys Production by Region: 2021 VS 2025 VS 2032 (t) Figure 35. Global Aluminum Die Casting Alloys Production Market Share by Region: 2021 VS 2025 VS 2032 Figure 36. Global Aluminum Die Casting Alloys Production Value Comparison by Region: 2021 VS 2025 VS 2032 (US$ Million) Figure 37. Global Aluminum Die Casting Alloys Production Value Share by Region: 2021 VS 2025 VS 2032 Figure 38. North America Aluminum Die Casting Alloys Production Value (2021-2032) & (US$ Million) Figure 39. Europe Aluminum Die Casting Alloys Production Value (2021-2032) & (US$ Million) Figure 40. Asia-Pacific Aluminum Die Casting Alloys Production Value (2021-2032) & (US$ Million) Figure 41. South America Aluminum Die Casting Alloys Production Value (2021-2032) & (US$ Million) Figure 42. Middle East & Africa Aluminum Die Casting Alloys Production Value (2021-2032) & (US$ Million) Figure 43. North America Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 44. North America Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 45. U.S. Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 46. Canada Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 47. Mexico Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 48. Europe Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 49. Europe Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 50. Germany Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 51. France Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 52. U.K. Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 53. Italy Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 54. Netherlands Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 55. Asia Pacific Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 56. Asia Pacific Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 57. China Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 58. Japan Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 59. South Korea Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 60. Southeast Asia Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 61. India Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 62. Australia Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 63. South America Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 64. South America Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 65. Brazil Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 66. Argentina Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 67. Chile Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 68. Colombia Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 69. Middle East & Africa Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 70. Middle East & Africa Aluminum Die Casting Alloys Consumption Market Share by Country (2021-2032) Figure 71. Egypt Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 72. South Africa Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 73. Israel Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 74. Türkiye Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 75. GCC Countries Aluminum Die Casting Alloys Consumption and Growth Rate (2021-2032) & (t) Figure 76. Aluminum Die Casting Alloys Value Chain Figure 77. Manufacturing Cost Structure Figure 78. Aluminum Die Casting Alloys Production Mode & Process Figure 79. Direct Comparison with Distribution Share Figure 80. Distributors Profiles Figure 81. Years Considered Figure 82. Research Process Figure 83. Key Executives Interviewed

Scope & coverage.

Types
  • A356
  • A360
  • A380
  • A383
  • B390
  • A413
  • Other
Applications
  • Automotive
  • Telecommunications
  • Home Appliances
  • Medical Equipment
  • Power Tools
  • Others
Companies covered
  • Nemak
  • Xusheng
  • Ryobi
  • Ahresty
  • DGS
  • IKD
  • Guangdong Wencan
  • Georg Fischer
  • Jiangsu Rongtai
  • Martinrea
  • Teksid
  • Guangdong Hongtu
  • Millison Technologies
  • Handtmann
  • Yadelin
  • Aludyne
  • Rockman
  • MK Tron
  • Form Technologies
  • Sandhar
  • LTH Castings
  • Endurance
  • Eontec
  • Tatfook Technology
  • Foryou Corporation
  • Gibbs
  • Nanjing Chervon

Inside the report.

1 Market Overview
  1. 1.1 Product Definition
  2. 1.2 Global Market Growth Prospects
  3. 1.2.1 Global Aluminum Die Casting Alloys Production Value Estimates and Forecasts (2021-2032)
  4. 1.2.2 Global Aluminum Die Casting Alloys Production Capacity Estimates and Forecasts (2021-2032)
  5. 1.2.3 Global Aluminum Die Casting Alloys Production Estimates and Forecasts (2021-2032)
  6. 1.2.4 Global Aluminum Die Casting Alloys Market Average Price (2021-2032)
  7. 1.3 Assumptions and Limitations
  8. 1.4 Study Goals and Objectives
2 Global Aluminum Die Casting Alloys Market Dynamics
  1. 2.1 Aluminum Die Casting Alloys Industry Trends
  2. 2.2 Aluminum Die Casting Alloys Industry Drivers
  3. 2.3 Aluminum Die Casting Alloys Industry Opportunities and Challenges
  4. 2.4 Aluminum Die Casting Alloys Industry Restraints
3 Aluminum Die Casting Alloys Market by Manufacturers
  1. 3.1 Global Aluminum Die Casting Alloys Production Value by Manufacturers (2021-2026)
  2. 3.2 Global Aluminum Die Casting Alloys Production by Manufacturers (2021-2026)
  3. 3.3 Global Aluminum Die Casting Alloys Average Price by Manufacturers (2021-2026)
  4. 3.4 Global Aluminum Die Casting Alloys Industry Manufacturers Ranking, 2024 VS 2025 VS 2026
  5. 3.5 Global Aluminum Die Casting Alloys Key Manufacturers Manufacturing Sites & Headquarters
  6. 3.6 Global Aluminum Die Casting Alloys Manufacturers, Product Type & Application
  7. 3.7 Global Aluminum Die Casting Alloys Manufacturers Established Date
  8. 3.8 Market Competitive Analysis
  9. 3.8.1 Global Aluminum Die Casting Alloys Market CR5 and HHI
  10. 3.8.2 Global Top 5 and 10 Aluminum Die Casting Alloys Players Market Share by Production Value in 2025
  11. 3.8.3 2025 Aluminum Die Casting Alloys Tier 1, Tier 2, and Tier 3
4 Aluminum Die Casting Alloys Market by Type
  1. 4.1 Aluminum Die Casting Alloys Type Introduction
  2. 4.1.1 A356
  3. 4.1.2 A360
  4. 4.1.3 A380
  5. 4.1.4 A383
  6. 4.1.5 B390
  7. 4.1.6 A413
  8. 4.1.7 Other
  9. 4.2 Global Aluminum Die Casting Alloys Production by Type
  10. 4.2.1 Global Aluminum Die Casting Alloys Production by Type (2021 VS 2025 VS 2032)
  11. 4.2.2 Global Aluminum Die Casting Alloys Production by Type (2021-2032)
  12. 4.2.3 Global Aluminum Die Casting Alloys Production Market Share by Type (2021-2032)
  13. 4.3 Global Aluminum Die Casting Alloys Production Value by Type
  14. 4.3.1 Global Aluminum Die Casting Alloys Production Value by Type (2021 VS 2025 VS 2032)
  15. 4.3.2 Global Aluminum Die Casting Alloys Production Value by Type (2021-2032)
  16. 4.3.3 Global Aluminum Die Casting Alloys Production Value Market Share by Type (2021-2032)
5 Aluminum Die Casting Alloys Market by Application
  1. 5.1 Aluminum Die Casting Alloys Application Introduction
  2. 5.1.1 Automotive
  3. 5.1.2 Telecommunications
  4. 5.1.3 Home Appliances
  5. 5.1.4 Medical Equipment
  6. 5.1.5 Power Tools
  7. 5.1.6 Others
  8. 5.2 Global Aluminum Die Casting Alloys Production by Application
  9. 5.2.1 Global Aluminum Die Casting Alloys Production by Application (2021 VS 2025 VS 2032)
  10. 5.2.2 Global Aluminum Die Casting Alloys Production by Application (2021-2032)
  11. 5.2.3 Global Aluminum Die Casting Alloys Production Market Share by Application (2021-2032)
  12. 5.3 Global Aluminum Die Casting Alloys Production Value by Application
  13. 5.3.1 Global Aluminum Die Casting Alloys Production Value by Application (2021 VS 2025 VS 2032)
  14. 5.3.2 Global Aluminum Die Casting Alloys Production Value by Application (2021-2032)
  15. 5.3.3 Global Aluminum Die Casting Alloys Production Value Market Share by Application (2021-2032)
6 Company Profiles
  1. 6.1 Nemak
  2. 6.1.1 Nemak Company Information
  3. 6.1.2 Nemak Business Overview
  4. 6.1.3 Nemak Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  5. 6.1.4 Nemak Aluminum Die Casting Alloys Product Portfolio
  6. 6.1.5 Nemak Recent Developments
  7. 6.2 Xusheng
  8. 6.2.1 Xusheng Company Information
  9. 6.2.2 Xusheng Business Overview
  10. 6.2.3 Xusheng Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  11. 6.2.4 Xusheng Aluminum Die Casting Alloys Product Portfolio
  12. 6.2.5 Xusheng Recent Developments
  13. 6.3 Ryobi
  14. 6.3.1 Ryobi Company Information
  15. 6.3.2 Ryobi Business Overview
  16. 6.3.3 Ryobi Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  17. 6.3.4 Ryobi Aluminum Die Casting Alloys Product Portfolio
  18. 6.3.5 Ryobi Recent Developments
  19. 6.4 Ahresty
  20. 6.4.1 Ahresty Company Information
  21. 6.4.2 Ahresty Business Overview
  22. 6.4.3 Ahresty Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  23. 6.4.4 Ahresty Aluminum Die Casting Alloys Product Portfolio
  24. 6.4.5 Ahresty Recent Developments
  25. 6.5 DGS
  26. 6.5.1 DGS Company Information
  27. 6.5.2 DGS Business Overview
  28. 6.5.3 DGS Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  29. 6.5.4 DGS Aluminum Die Casting Alloys Product Portfolio
  30. 6.5.5 DGS Recent Developments
  31. 6.6 IKD
  32. 6.6.1 IKD Company Information
  33. 6.6.2 IKD Business Overview
  34. 6.6.3 IKD Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  35. 6.6.4 IKD Aluminum Die Casting Alloys Product Portfolio
  36. 6.6.5 IKD Recent Developments
  37. 6.7 Guangdong Wencan
  38. 6.7.1 Guangdong Wencan Company Information
  39. 6.7.2 Guangdong Wencan Business Overview
  40. 6.7.3 Guangdong Wencan Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  41. 6.7.4 Guangdong Wencan Aluminum Die Casting Alloys Product Portfolio
  42. 6.7.5 Guangdong Wencan Recent Developments
  43. 6.8 Georg Fischer
  44. 6.8.1 Georg Fischer Company Information
  45. 6.8.2 Georg Fischer Business Overview
  46. 6.8.3 Georg Fischer Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  47. 6.8.4 Georg Fischer Aluminum Die Casting Alloys Product Portfolio
  48. 6.8.5 Georg Fischer Recent Developments
  49. 6.9 Jiangsu Rongtai
  50. 6.9.1 Jiangsu Rongtai Company Information
  51. 6.9.2 Jiangsu Rongtai Business Overview
  52. 6.9.3 Jiangsu Rongtai Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  53. 6.9.4 Jiangsu Rongtai Aluminum Die Casting Alloys Product Portfolio
  54. 6.9.5 Jiangsu Rongtai Recent Developments
  55. 6.10 Martinrea
  56. 6.10.1 Martinrea Company Information
  57. 6.10.2 Martinrea Business Overview
  58. 6.10.3 Martinrea Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  59. 6.10.4 Martinrea Aluminum Die Casting Alloys Product Portfolio
  60. 6.10.5 Martinrea Recent Developments
  61. 6.11 Teksid
  62. 6.11.1 Teksid Company Information
  63. 6.11.2 Teksid Business Overview
  64. 6.11.3 Teksid Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  65. 6.11.4 Teksid Aluminum Die Casting Alloys Product Portfolio
  66. 6.11.5 Teksid Recent Developments
  67. 6.12 Guangdong Hongtu
  68. 6.12.1 Guangdong Hongtu Company Information
  69. 6.12.2 Guangdong Hongtu Business Overview
  70. 6.12.3 Guangdong Hongtu Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  71. 6.12.4 Guangdong Hongtu Aluminum Die Casting Alloys Product Portfolio
  72. 6.12.5 Guangdong Hongtu Recent Developments
  73. 6.13 Millison Technologies
  74. 6.13.1 Millison Technologies Company Information
  75. 6.13.2 Millison Technologies Business Overview
  76. 6.13.3 Millison Technologies Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  77. 6.13.4 Millison Technologies Aluminum Die Casting Alloys Product Portfolio
  78. 6.13.5 Millison Technologies Recent Developments
  79. 6.14 Handtmann
  80. 6.14.1 Handtmann Company Information
  81. 6.14.2 Handtmann Business Overview
  82. 6.14.3 Handtmann Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  83. 6.14.4 Handtmann Aluminum Die Casting Alloys Product Portfolio
  84. 6.14.5 Handtmann Recent Developments
  85. 6.15 Yadelin
  86. 6.15.1 Yadelin Company Information
  87. 6.15.2 Yadelin Business Overview
  88. 6.15.3 Yadelin Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  89. 6.15.4 Yadelin Aluminum Die Casting Alloys Product Portfolio
  90. 6.15.5 Yadelin Recent Developments
  91. 6.16 Aludyne
  92. 6.16.1 Aludyne Company Information
  93. 6.16.2 Aludyne Business Overview
  94. 6.16.3 Aludyne Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  95. 6.16.4 Aludyne Aluminum Die Casting Alloys Product Portfolio
  96. 6.16.5 Aludyne Recent Developments
  97. 6.17 Rockman
  98. 6.17.1 Rockman Company Information
  99. 6.17.2 Rockman Business Overview
  100. 6.17.3 Rockman Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  101. 6.17.4 Rockman Aluminum Die Casting Alloys Product Portfolio
  102. 6.17.5 Rockman Recent Developments
  103. 6.18 MK Tron
  104. 6.18.1 MK Tron Company Information
  105. 6.18.2 MK Tron Business Overview
  106. 6.18.3 MK Tron Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  107. 6.18.4 MK Tron Aluminum Die Casting Alloys Product Portfolio
  108. 6.18.5 MK Tron Recent Developments
  109. 6.19 Form Technologies
  110. 6.19.1 Form Technologies Company Information
  111. 6.19.2 Form Technologies Business Overview
  112. 6.19.3 Form Technologies Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  113. 6.19.4 Form Technologies Aluminum Die Casting Alloys Product Portfolio
  114. 6.19.5 Form Technologies Recent Developments
  115. 6.20 Sandhar
  116. 6.20.1 Sandhar Company Information
  117. 6.20.2 Sandhar Business Overview
  118. 6.20.3 Sandhar Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  119. 6.20.4 Sandhar Aluminum Die Casting Alloys Product Portfolio
  120. 6.20.5 Sandhar Recent Developments
  121. 6.21 LTH Castings
  122. 6.21.1 LTH Castings Company Information
  123. 6.21.2 LTH Castings Business Overview
  124. 6.21.3 LTH Castings Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  125. 6.21.4 LTH Castings Aluminum Die Casting Alloys Product Portfolio
  126. 6.21.5 LTH Castings Recent Developments
  127. 6.22 Endurance
  128. 6.22.1 Endurance Company Information
  129. 6.22.2 Endurance Business Overview
  130. 6.22.3 Endurance Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  131. 6.22.4 Endurance Aluminum Die Casting Alloys Product Portfolio
  132. 6.22.5 Endurance Recent Developments
  133. 6.23 Eontec
  134. 6.23.1 Eontec Company Information
  135. 6.23.2 Eontec Business Overview
  136. 6.23.3 Eontec Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  137. 6.23.4 Eontec Aluminum Die Casting Alloys Product Portfolio
  138. 6.23.5 Eontec Recent Developments
  139. 6.24 Tatfook Technology
  140. 6.24.1 Tatfook Technology Company Information
  141. 6.24.2 Tatfook Technology Business Overview
  142. 6.24.3 Tatfook Technology Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  143. 6.24.4 Tatfook Technology Aluminum Die Casting Alloys Product Portfolio
  144. 6.24.5 Tatfook Technology Recent Developments
  145. 6.25 Foryou Corporation
  146. 6.25.1 Foryou Corporation Company Information
  147. 6.25.2 Foryou Corporation Business Overview
  148. 6.25.3 Foryou Corporation Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  149. 6.25.4 Foryou Corporation Aluminum Die Casting Alloys Product Portfolio
  150. 6.25.5 Foryou Corporation Recent Developments
  151. 6.26 Gibbs
  152. 6.26.1 Gibbs Company Information
  153. 6.26.2 Gibbs Business Overview
  154. 6.26.3 Gibbs Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  155. 6.26.4 Gibbs Aluminum Die Casting Alloys Product Portfolio
  156. 6.26.5 Gibbs Recent Developments
  157. 6.27 Nanjing Chervon
  158. 6.27.1 Nanjing Chervon Company Information
  159. 6.27.2 Nanjing Chervon Business Overview
  160. 6.27.3 Nanjing Chervon Aluminum Die Casting Alloys Production, Value and Gross Margin (2021-2026)
  161. 6.27.4 Nanjing Chervon Aluminum Die Casting Alloys Product Portfolio
  162. 6.27.5 Nanjing Chervon Recent Developments
7 Global Aluminum Die Casting Alloys Production by Region
  1. 7.1 Global Aluminum Die Casting Alloys Production by Region: 2021 VS 2025 VS 2032
  2. 7.2 Global Aluminum Die Casting Alloys Production by Region (2021-2032)
  3. 7.2.1 Global Aluminum Die Casting Alloys Production by Region (2021-2026)
  4. 7.2.2 Global Aluminum Die Casting Alloys Production Forecast by Region (2027-2032)
  5. 7.3 Global Aluminum Die Casting Alloys Production by Region: 2021 VS 2025 VS 2032
  6. 7.4 Global Aluminum Die Casting Alloys Production Value by Region (2021-2032)
  7. 7.4.1 Global Aluminum Die Casting Alloys Production Value by Region (2021-2026)
  8. 7.4.2 Global Aluminum Die Casting Alloys Production Value by Region (2027-2032)
  9. 7.5 Global Aluminum Die Casting Alloys Market Price Analysis by Region (2021-2032)
  10. 7.6 Regional Production Value Trends (2021-2032)
  11. 7.6.1 North America Aluminum Die Casting Alloys Production Value (2021-2032)
  12. 7.6.2 Europe Aluminum Die Casting Alloys Production Value (2021-2032)
  13. 7.6.3 Asia-Pacific Aluminum Die Casting Alloys Production Value (2021-2032)
  14. 7.6.4 South America Aluminum Die Casting Alloys Production Value (2021-2032)
  15. 7.6.5 Middle East & Africa Aluminum Die Casting Alloys Production Value (2021-2032)
8 Global Aluminum Die Casting Alloys Consumption by Region
  1. 8.1 Global Aluminum Die Casting Alloys Consumption by Region: 2021 VS 2025 VS 2032
  2. 8.2 Global Aluminum Die Casting Alloys Consumption by Region (2021-2032)
  3. 8.2.1 Global Aluminum Die Casting Alloys Consumption by Region (2021-2026)
  4. 8.2.2 Global Aluminum Die Casting Alloys Consumption by Region (2027-2032)
  5. 8.3 North America
  6. 8.3.1 North America Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  7. 8.3.2 North America Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  8. 8.3.3 U.S.
  9. 8.3.4 Canada
  10. 8.3.5 Mexico
  11. 8.4 Europe
  12. 8.4.1 Europe Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  13. 8.4.2 Europe Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  14. 8.4.3 Germany
  15. 8.4.4 France
  16. 8.4.5 U.K.
  17. 8.4.6 Italy
  18. 8.4.7 Netherlands
  19. 8.5 Asia Pacific
  20. 8.5.1 Asia Pacific Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  21. 8.5.2 Asia Pacific Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  22. 8.5.3 China
  23. 8.5.4 Japan
  24. 8.5.5 South Korea
  25. 8.5.6 Southeast Asia
  26. 8.5.7 India
  27. 8.5.8 Australia
  28. 8.6 South America
  29. 8.6.1 South America Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  30. 8.6.2 South America Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  31. 8.6.3 Brazil
  32. 8.6.4 Argentina
  33. 8.6.5 Chile
  34. 8.6.6 Colombia
  35. 8.7 Middle East & Africa
  36. 8.7.1 Middle East & Africa Aluminum Die Casting Alloys Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
  37. 8.7.2 Middle East & Africa Aluminum Die Casting Alloys Consumption by Country (2021-2032)
  38. 8.7.3 Egypt
  39. 8.7.4 South Africa
  40. 8.7.5 Israel
  41. 8.7.6 Türkiye
  42. 8.7.7 GCC Countries
9 Value Chain and Sales Channels Analysis
  1. 9.1 Aluminum Die Casting Alloys Value Chain Analysis
  2. 9.1.1 Aluminum Die Casting Alloys Key Raw Materials
  3. 9.1.2 Raw Materials Key Suppliers
  4. 9.1.3 Manufacturing Cost Structure
  5. 9.1.4 Aluminum Die Casting Alloys Production Mode & Process
  6. 9.2 Aluminum Die Casting Alloys Sales Channels Analysis
  7. 9.2.1 Direct Comparison with Distribution Share
  8. 9.2.2 Aluminum Die Casting Alloys Distributors
  9. 9.2.3 Aluminum Die Casting Alloys Customers
10 Concluding Insights
    11 Appendix
    1. 11.1 Reasons for Doing This Study
    2. 11.2 Research Methodology
    3. 11.3 Research Process
    4. 11.4 Authors List of This Report
    5. 11.5 Data Source
    6. 11.5.1 Secondary Sources
    7. 11.5.2 Primary Sources
    8. 11.6 Disclaimer

    GET THE RESEARCH

    Choose your license.

    Choose who needs access.
    All options are for this report and research series.

    Compare access permissions.

    Single User License
    One named user. Individual access.
    Multi User License
    Up to 5 users in the same department.
    Enterprise License
    Organization-wide access within the agreed license.

    Access applies to the purchased edition. Later editions are separate purchases.

    License options
    $3,950USD
    Buy now

    PDF by email within 3–5 working days after payment confirmation.

    Talk to an analyst
    APO Research, Inc.
    Talk to an analyst