APO RESEARCH · REPORT
Piezoelectric Actuators
A piezoelectric actuator uses the inverse piezoelectric effect to produce mechanical deformation when an electric field is applied.
Product & engineering
Understand the product.
Piezoelectric actuators are ceramic elements used to convert electrical energy into mechanical energy such as displacement or force by utilizing the piezoelectric longitudinal effect. A piezoelectric actuator converts an electrical signal into a precisely controlled physical displacement (stroke). If displacement is prevented, a useable force (blocking force) will develop. The precise movement control afforded by piezoelectric actuators is used to finely adjust machining tools, lenses, mirrors, or other equipment. A piezo actuator can be used to control hydraulic valves, act as a small-volume pump or special-purpose motor, and in other applications requiring movement or force. There are many applications where a piezoelectric actuator may be used, such as ultraprecise positioning and in the generation and handling of high forces or pressures in static or in dynamic situations.
Active ceramic layers and electrodes form the electromechanical element. Multilayer construction permits thin active layers and a different drive-voltage arrangement from assemblies of thicker individual discs. End pieces transfer force, while a protective coating or housing addresses the operating environment. A preloaded actuator assembly also adds mechanical parts; a bare stack does not supply its own guidance, preload or positioning control.
Free displacement and blocking force describe different limiting conditions. The installed movement depends on the actuator and load stiffness, mechanical preload and geometry. Brittle ceramic requires appropriate loading and protection against unintended tension, shear or bending. A flexure-guided assembly can convert or amplify movement, but its output force and dynamics must be evaluated with that mechanism rather than copied from the bare stack's rating.
Voltage-driven ferroelectric actuators can exhibit hysteresis and a gradual position change after a voltage step. A suitable position sensor and closed control loop can reduce these effects at the measured output. Fast operation also depends on the amplifier, electrical capacitance, attached mass and mechanical resonance. A rapid initial response is not the same as a settled, accurate positioning move; a quoted unloaded resonance is not a complete system bandwidth.
What turns activity into demand
Piezo actuation can support precise adjustments, fast switching or active control. Its value depends on how the small deformation reaches the tool, valve or optical element and how that output is measured. The product can be a piezoelectric element or a packaged actuator with defined preload and interfaces. A nanopositioning stage includes additional guides, sensors and control functions. Piezoelectric sensors use a related material response to measure loads or motion rather than supply the same actuation function. Stack, bending and shear configurations need distinct comparisons rather than a universal force-to-travel ranking.
The commercial boundary
The product can be a piezoelectric element or a packaged actuator with defined preload and interfaces. A nanopositioning stage includes additional guides, sensors and control functions. Piezoelectric sensors use a related material response to measure loads or motion rather than supply the same actuation function. Stack, bending and shear configurations need distinct comparisons rather than a universal force-to-travel ranking.
Selected research
Industry Research
Piezoelectric Actuators Industry Research Report 2026
Market perspective
Piezoelectric actuators are ceramic elements used to convert electrical energy into mechanical energy such as displacement or force by utilizing the piezoelectric longitudinal effect. A piezoelectric actuator converts an electrical signal into a precisely controlled physical displacement (stroke). If displacement is prevented, a useable force (blocking force) will develop. The precise movement control afforded by piezoelectric actuators is used to finely adjust machining tools, lenses, mirrors, or other equipment. A piezo actuator can be used to control hydraulic valves, act as a small-volume pump or special-purpose motor, and in other applications requiring movement or force. There are many applications where a piezoelectric actuator may be used, such as ultraprecise positioning and in the generation and handling of high forces or pressures in static or in dynamic situations.
Global piezoelectric actuators main manufactuers include TDK Corporation, Murata Manufacturing and KEMET(TOKIN Corporation), totally accounting for about 41% of the market. Japan is the largest market of piezoelectric actuators, holding a share about 50%. As for the application of products, it is widely used in industrial and manufacturing, automotive, consumer electronics, medical, military and others. The most common application is in industrial and manufacturing, with a share about 29%. As for the types of products, it can be divided into stack actuators and stripe actuators. The most common type is stack actuators, with a share over 70%.
Report Scope
Read the full market overview
This report quantifies the global Piezoelectric Actuators market in revenue (US$ million) and, where applicable, sales volume (K Units), using 2025 as the base year and providing annual historical and forecast data for 2021–2032.
It standardizes definitions of types and applications, harmonizes vendor attribution, and presents comparable time series by company, type, application, and region/country, including indicative price bands (US$/K Units) and concentration ratios (CR5/CR10).
The outputs are intended to support strategy development, budgeting, and performance benchmarking for manufacturers, new entrants, channel partners, and investors; the report also reviews technology shifts and notable product introductions relevant to Piezoelectric Actuators.
Key Companies & Market Share Insights
This section profiles leading manufacturers, combining 2021–2025 results with a 2026–2032 outlook. It reports revenue, market share, price bands, product and application mix, regional and channel mix, and key developments (M&A, capacity additions, certifications). It also provides global revenue, average price, and—where applicable—sales volume by manufacturer, and calculates CR5/CR10 and rank changes to support comparative benchmarking.
Piezoelectric Actuators Market by Company
TDK Corporation
Murata Manufacturing
KEMET (TOKIN Corporation)
CTS (Noliac)
TAIYO YUDEN
Johnson Matthey
Physik Instrumente (PI) Group
Piezosystem Jena
APC International (Schneider Electric)
Kinetic Ceramics
DSM
Piezoelectric Actuators Segment by Type
Stack Actuators
Stripe Actuators
Piezoelectric Actuators Segment by Application
Industrial and Manufacturing
Automotive
Consumer Electronics
Medical
Military
Others
Piezoelectric Actuators Segment by Region
North America
United States
Canada
Mexico
Europe
Germany
France
U.K.
Italy
Russia
Spain
Netherlands
Switzerland
Sweden
Poland
Asia-Pacific
China
Japan
South Korea
India
Australia
Taiwan
Southeast Asia
South America
Brazil
Argentina
Chile
Middle East & Africa
Egypt
South Africa
Israel
Türkiye
GCC Countries
Key Drivers & Barriers
High-impact rendering factors and drivers have been studied in this report to aid the readers to understand the general development. Moreover, the report includes restraints and challenges that may act as stumbling blocks on the way of the players. This will assist the users to be attentive and make informed decisions related to business. Specialists have also laid their focus on the upcoming business prospects.
Reasons to Buy This Report
1. This report will help the readers to understand the competition within the industries and strategies for the competitive environment to enhance the potential profit. The report also focuses on the competitive landscape of the global Piezoelectric Actuators market, and introduces in detail the market share, industry ranking, competitor ecosystem, market performance, new product development, operation situation, expansion, and acquisition. etc. of the main players, which helps the readers to identify the main competitors and deeply understand the competition pattern of the market.
2. This report will help stakeholders to understand the global industry status and trends of Piezoelectric Actuators and provides them with information on key market drivers, restraints, challenges, and opportunities.
3. This report will help stakeholders to understand competitors better and gain more insights to strengthen their position in their businesses. The competitive landscape section includes the market share and rank (in volume and value), competitor ecosystem, new product development, expansion, and acquisition.
4. This report stays updated with novel technology integration, features, and the latest developments in the market
5. This report helps stakeholders to gain insights into which regions to target globally
6. This report helps stakeholders to gain insights into the end-user perception concerning the adoption of Piezoelectric Actuators.
7. This report helps stakeholders to identify some of the key players in the market and understand their valuable contribution.
Chapter Outline
Chapter 1: Research objectives, research methods, data sources, data cross-validation;
Chapter 2: Introduces the report scope of the report, executive summary of different market segments (by region, product type, application, etc), including the market size of each market segment, future development potential, and so on. It offers a high-level view of the current state of the market and its likely evolution in the short to mid-term, and long term.
Chapter 3: Detailed analysis of Piezoelectric Actuators manufacturers competitive landscape, price, production and value market share, latest development plan, merger, and acquisition information, etc.
Chapter 4: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product production/output, value, price, gross margin, product introduction, recent development, etc.
Chapter 5: Production/output, value of Piezoelectric Actuators by region/country. It provides a quantitative analysis of the market size and development potential of each region in the next six years.
Chapter 6: Consumption of Piezoelectric Actuators in regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space, and production of each country in the world.
Chapter 7: Provides the analysis of various market segments by type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments.
Chapter 8: Provides the analysis of various market segments by application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.
Chapter 9: Analysis of industrial chain, including the upstream and downstream of the industry.
Chapter 10: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.
Chapter 11: The main points and conclusions of the report.
More report detail
Tables and figures
Scope & coverage.
Types
- Stack Actuators
- Stripe Actuators
Applications
- Industrial and Manufacturing
- Automotive
- Consumer Electronics
- Medical
- Military
- Others
Companies covered
- TDK Corporation
- Murata Manufacturing
- KEMET (TOKIN Corporation)
- CTS (Noliac)
- TAIYO YUDEN
- Johnson Matthey
- Physik Instrumente (PI) Group
- Piezosystem Jena
- APC International (Schneider Electric)
- Kinetic Ceramics
- DSM
Inside the report.
1 Preface
- 1.1 Scope of Report
- 1.2 Reasons for Doing This Study
- 1.3 Research Methodology
- 1.4 Research Process
- 1.5 Data Source
- 1.5.1 Secondary Sources
- 1.5.2 Primary Sources
2 Market Overview
- 2.1 Product Definition
- 2.2 Piezoelectric Actuators by Type
- 2.2.1 Market Value Comparison by Type (2021 VS 2025 VS 2032) & (US$ Million)
- 2.2.2 Stack Actuators
- 2.2.3 Stripe Actuators
- 2.3 Piezoelectric Actuators by Application
- 2.3.1 Market Value Comparison by Application (2021 VS 2025 VS 2032) & (US$ Million)
- 2.3.2 Industrial and Manufacturing
- 2.3.3 Automotive
- 2.3.4 Consumer Electronics
- 2.3.5 Medical
- 2.3.6 Military
- 2.3.7 Others
- 2.4 Global Market Growth Prospects
- 2.4.1 Global Piezoelectric Actuators Production Value Estimates and Forecasts (2021-2032)
- 2.4.2 Global Piezoelectric Actuators Production Capacity Estimates and Forecasts (2021-2032)
- 2.4.3 Global Piezoelectric Actuators Production Estimates and Forecasts (2021-2032)
- 2.4.4 Global Piezoelectric Actuators Market Average Price (2021-2032)
3 Market Competitive Landscape by Manufacturers
- 3.1 Global Piezoelectric Actuators Production by Manufacturers (2021-2026)
- 3.2 Global Piezoelectric Actuators Production Value by Manufacturers (2021-2026)
- 3.3 Global Piezoelectric Actuators Average Price by Manufacturers (2021-2026)
- 3.4 Global Piezoelectric Actuators Industry Manufacturers Ranking, 2024 VS 2025 VS 2026
- 3.5 Global Piezoelectric Actuators Key Manufacturers, Manufacturing Sites & Headquarters
- 3.6 Global Piezoelectric Actuators Manufacturers, Product Type & Application
- 3.7 Global Piezoelectric Actuators Manufacturers Established Date
- 3.8 Global Piezoelectric Actuators Market CR5 and HHI
- 3.9 Global Manufacturers Mergers & Acquisition
4 Manufacturers Profiled
- 4.1 TDK Corporation
- 4.1.1 TDK Corporation Piezoelectric Actuators Company Information
- 4.1.2 TDK Corporation Piezoelectric Actuators Business Overview
- 4.1.3 TDK Corporation Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.1.4 TDK Corporation Product Portfolio
- 4.1.5 TDK Corporation Recent Developments
- 4.2 Murata Manufacturing
- 4.2.1 Murata Manufacturing Piezoelectric Actuators Company Information
- 4.2.2 Murata Manufacturing Piezoelectric Actuators Business Overview
- 4.2.3 Murata Manufacturing Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.2.4 Murata Manufacturing Product Portfolio
- 4.2.5 Murata Manufacturing Recent Developments
- 4.3 KEMET (TOKIN Corporation)
- 4.3.1 KEMET (TOKIN Corporation) Piezoelectric Actuators Company Information
- 4.3.2 KEMET (TOKIN Corporation) Piezoelectric Actuators Business Overview
- 4.3.3 KEMET (TOKIN Corporation) Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.3.4 KEMET (TOKIN Corporation) Product Portfolio
- 4.3.5 KEMET (TOKIN Corporation) Recent Developments
- 4.4 CTS (Noliac)
- 4.4.1 CTS (Noliac) Piezoelectric Actuators Company Information
- 4.4.2 CTS (Noliac) Piezoelectric Actuators Business Overview
- 4.4.3 CTS (Noliac) Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.4.4 CTS (Noliac) Product Portfolio
- 4.4.5 CTS (Noliac) Recent Developments
- 4.5 TAIYO YUDEN
- 4.5.1 TAIYO YUDEN Piezoelectric Actuators Company Information
- 4.5.2 TAIYO YUDEN Piezoelectric Actuators Business Overview
- 4.5.3 TAIYO YUDEN Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.5.4 TAIYO YUDEN Product Portfolio
- 4.5.5 TAIYO YUDEN Recent Developments
- 4.6 Johnson Matthey
- 4.6.1 Johnson Matthey Piezoelectric Actuators Company Information
- 4.6.2 Johnson Matthey Piezoelectric Actuators Business Overview
- 4.6.3 Johnson Matthey Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.6.4 Johnson Matthey Product Portfolio
- 4.6.5 Johnson Matthey Recent Developments
- 4.7 Physik Instrumente (PI) Group
- 4.7.1 Physik Instrumente (PI) Group Piezoelectric Actuators Company Information
- 4.7.2 Physik Instrumente (PI) Group Piezoelectric Actuators Business Overview
- 4.7.3 Physik Instrumente (PI) Group Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.7.4 Physik Instrumente (PI) Group Product Portfolio
- 4.7.5 Physik Instrumente (PI) Group Recent Developments
- 4.8 Piezosystem Jena
- 4.8.1 Piezosystem Jena Piezoelectric Actuators Company Information
- 4.8.2 Piezosystem Jena Piezoelectric Actuators Business Overview
- 4.8.3 Piezosystem Jena Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.8.4 Piezosystem Jena Product Portfolio
- 4.8.5 Piezosystem Jena Recent Developments
- 4.9 APC International (Schneider Electric)
- 4.9.1 APC International (Schneider Electric) Piezoelectric Actuators Company Information
- 4.9.2 APC International (Schneider Electric) Piezoelectric Actuators Business Overview
- 4.9.3 APC International (Schneider Electric) Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.9.4 APC International (Schneider Electric) Product Portfolio
- 4.9.5 APC International (Schneider Electric) Recent Developments
- 4.10 Kinetic Ceramics
- 4.10.1 Kinetic Ceramics Piezoelectric Actuators Company Information
- 4.10.2 Kinetic Ceramics Piezoelectric Actuators Business Overview
- 4.10.3 Kinetic Ceramics Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.10.4 Kinetic Ceramics Product Portfolio
- 4.10.5 Kinetic Ceramics Recent Developments
- 4.11 DSM
- 4.11.1 DSM Piezoelectric Actuators Company Information
- 4.11.2 DSM Piezoelectric Actuators Business Overview
- 4.11.3 DSM Piezoelectric Actuators Production, Value and Gross Margin (2021-2026)
- 4.11.4 DSM Product Portfolio
- 4.11.5 DSM Recent Developments
5 Global Piezoelectric Actuators Production by Region
- 5.1 Global Piezoelectric Actuators Production Estimates and Forecasts by Region: 2021 VS 2025 VS 2032
- 5.2 Global Piezoelectric Actuators Production by Region: 2021-2032
- 5.2.1 Global Piezoelectric Actuators Production by Region: 2021-2026
- 5.2.2 Global Piezoelectric Actuators Production Forecast by Region (2027-2032)
- 5.3 Global Piezoelectric Actuators Production Value Estimates and Forecasts by Region: 2021 VS 2025 VS 2032
- 5.4 Global Piezoelectric Actuators Production Value by Region: 2021-2032
- 5.4.1 Global Piezoelectric Actuators Production Value by Region: 2021-2026
- 5.4.2 Global Piezoelectric Actuators Production Value Forecast by Region (2027-2032)
- 5.5 Global Piezoelectric Actuators Market Price Analysis by Region (2021-2026)
- 5.6 Global Piezoelectric Actuators Production and Value, YOY Growth
- 5.6.1 North America Piezoelectric Actuators Production Value Estimates and Forecasts (2021-2032)
- 5.6.2 Europe Piezoelectric Actuators Production Value Estimates and Forecasts (2021-2032)
- 5.6.3 China Piezoelectric Actuators Production Value Estimates and Forecasts (2021-2032)
- 5.6.4 Japan Piezoelectric Actuators Production Value Estimates and Forecasts (2021-2032)
6 Global Piezoelectric Actuators Consumption by Region
- 6.1 Global Piezoelectric Actuators Consumption Estimates and Forecasts by Region: 2021 VS 2025 VS 2032
- 6.2 Global Piezoelectric Actuators Consumption by Region (2021-2032)
- 6.2.1 Global Piezoelectric Actuators Consumption by Region: 2021-2026
- 6.2.2 Global Piezoelectric Actuators Forecasted Consumption by Region (2027-2032)
- 6.3 North America
- 6.3.1 North America Piezoelectric Actuators Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
- 6.3.2 North America Piezoelectric Actuators Consumption by Country (2021-2032)
- 6.3.3 United States
- 6.3.4 Canada
- 6.3.5 Mexico
- 6.4 Europe
- 6.4.1 Europe Piezoelectric Actuators Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
- 6.4.2 Europe Piezoelectric Actuators Consumption by Country (2021-2032)
- 6.4.3 Germany
- 6.4.4 France
- 6.4.5 U.K.
- 6.4.6 Italy
- 6.4.7 Russia
- 6.4.8 Spain
- 6.4.9 Netherlands
- 6.4.10 Switzerland
- 6.4.11 Sweden
- 6.4.12 Poland
- 6.5 Asia Pacific
- 6.5.1 Asia Pacific Piezoelectric Actuators Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
- 6.5.2 Asia Pacific Piezoelectric Actuators Consumption by Country (2021-2032)
- 6.5.3 China
- 6.5.4 Japan
- 6.5.5 South Korea
- 6.5.6 India
- 6.5.7 Australia
- 6.5.8 Taiwan
- 6.5.9 Southeast Asia
- 6.6 South America, Middle East & Africa
- 6.6.1 South America, Middle East & Africa Piezoelectric Actuators Consumption Growth Rate by Country: 2021 VS 2025 VS 2032
- 6.6.2 South America, Middle East & Africa Piezoelectric Actuators Consumption by Country (2021-2032)
- 6.6.3 Brazil
- 6.6.4 Argentina
- 6.6.5 Chile
- 6.6.6 Turkey
- 6.6.7 GCC Countries
7 Segment by Type
- 7.1 Global Piezoelectric Actuators Production by Type (2021-2032)
- 7.1.1 Global Piezoelectric Actuators Production by Type (2021-2032) & (K Units)
- 7.1.2 Global Piezoelectric Actuators Production Market Share by Type (2021-2032)
- 7.2 Global Piezoelectric Actuators Production Value by Type (2021-2032)
- 7.2.1 Global Piezoelectric Actuators Production Value by Type (2021-2032) & (US$ Million)
- 7.2.2 Global Piezoelectric Actuators Production Value Market Share by Type (2021-2032)
- 7.3 Global Piezoelectric Actuators Price by Type (2021-2032)
8 Segment by Application
- 8.1 Global Piezoelectric Actuators Production by Application (2021-2032)
- 8.1.1 Global Piezoelectric Actuators Production by Application (2021-2032) & (K Units)
- 8.1.2 Global Piezoelectric Actuators Production Market Share by Application (2021-2032)
- 8.2 Global Piezoelectric Actuators Production Value by Application (2021-2032)
- 8.2.1 Global Piezoelectric Actuators Production Value by Application (2021-2032) & (US$ Million)
- 8.2.2 Global Piezoelectric Actuators Production Value Market Share by Application (2021-2032)
- 8.3 Global Piezoelectric Actuators Price by Application (2021-2032)
9 Value Chain and Sales Channels Analysis of the Market
- 9.1 Piezoelectric Actuators Value Chain Analysis
- 9.1.1 Piezoelectric Actuators Key Raw Materials
- 9.1.2 Raw Materials Key Suppliers
- 9.1.3 Piezoelectric Actuators Production Mode & Process
- 9.2 Piezoelectric Actuators Sales Channels Analysis
- 9.2.1 Direct Comparison with Distribution Share
- 9.2.2 Piezoelectric Actuators Distributors
- 9.2.3 Piezoelectric Actuators Customers
10 Global Piezoelectric Actuators Analyzing Market Dynamics
- 10.1 Piezoelectric Actuators Industry Trends
- 10.2 Piezoelectric Actuators Industry Drivers
- 10.3 Piezoelectric Actuators Industry Opportunities and Challenges
- 10.4 Piezoelectric Actuators Industry Restraints
11 Report Conclusion
12 Disclaimer
GET THE RESEARCH
Choose your license.
Choose who needs access.
All options are for this report and research series.
PDF by email within 3–5 working days after payment confirmation.
Talk to an analyst